New Media Technology Omnia ONE Multicast manual Main Menu Selections, Preset, Processing

Page 31

Chapter-4: Main Menu Selections

This section presents an overview of the five Main Menu items, (Preset:, Processing, Input/Output, Administrative and Lock Front Panel) their submenus (if any), and details about each of the adjustable controls within.

Preset

OmniaONE is equipped with a selection of factory presets that can be used to instantly configure the processing for common applications. The currently loaded preset is displayed to the right of Preset: on the top line of the Main Menu.

Highlighting Preset: and clicking the jog wheel (see Using the Jog Wheel on Pg. 24) will open the Preset menu.

Rotating the jog wheel will scroll through all of the factory presets as well as any user presets that have been stored within the unit’s non-volatile memory. The currently loaded preset will appear with square brackets around it.

Clicking the jog wheel will load the displayed preset into the OmniaONE, instantly setting the various processing parameters.

To exit the Preset menu without loading a preset, rotate the jog wheel clockwise until *cancel* is displayed and click.

In the Multicast, there are two groups of factory presets, Music and Talk. Within each group, there are presets for each of four bitrates commonly used by codecs following the OmniaONE: 24, 32, 48 and 64 kbps.

By starting with one of the factory presets (usually the one named closest to the primary programming and bitrate to be used on the channel the OmniaONE Multicast is processing) and then altering it using the controls in the Processing menu, you may change the sound of a preset and then save it with your changes as a user preset for either immediate use or later recall.

By alternately loading different presets you may compare the sound between them.

Here in the Preset: menu, you may select and load presets to use, but not save, delete, or rename them. Those operations may be accomplished from within the Processing menu.

Processing

Highlighting and clicking Processing from the main menu opens up the Processing submenu that contains these options: Adjust Processing, Save Preset, Delete Preset, Rename Preset and <-Exit.This is where the sound of the OmniaONE can be fine-tuned and customized. Once customized, this is also where your user presets are saved, deleted and renamed. Each submenu in the Adjust Processing menu can be highlighted, clicked to open, and the individual controls within can be adjusted to individual taste.

Since you cannot build a preset from scratch, a factory preset must be used as a starting point for creating your “signature sound.” Each processor parameter may be adjusted to taste as required. Once the processing is adjusted, the Save Preset function is used to store your changes as a new user preset to non-volatile internal memory.

Using the Delete Preset and Rename Preset options, existing user presets may be deleted from memory or renamed as needed. The original factory presets can never be deleted or renamed.

We will discuss the Save, Delete, Rename and <-Exitoptions first before delving into the details of the Adjust Processing menu.

OmniaONE Multicast - Use and Operation Manual – Version 0.90

31

Image 31
Contents Omnia 2101 Superior Avenue Cleveland, Ohio 44114 USA Installation and Operation Manual Version 0.9i / MarchOmnia ONE Multicast Audio Processor withOmniaONE Multicast - Use and Operation Manual - Version January Welcome to Omnia.ONEOmniaONE Multicast - Use and Operation Manual - Version Jog Wheel OmniaONE Quick-Start SetupHeadphone Jack Headphone Level ControlTable Of Contents Processing PresetAdministrative Chapter-4 Main Menu SelectionsAppendix A Performance Specifications Multicast Sensus→ Technology Audio Processingx3Overview Codec ProvisioningOmniaONE Multicast and HD→ Radio The Omnia Development Team So… what’s so smart about Sensus→?Important Note SincerelyS A F E T Y I N S T R U C T I O N S The Exclamation Point HAZARD / WARNING LABELSThe Lightning Flash With with the EU RoHS Directive Manual Update Notification About This Manual Chapter-1 InstallationPre-Installation Tasks AC Power EnvironmentOmniaONE utilizes an un-switched EMI-filtered IEC power-entry module Installation & ConnectionsRear Panel Connections A Note About Relative PhaseAnalog Audio Inputs and Outputs Ethernet 10BaseT/100BaseT Remote and Livewire I/O Ethernet ConnectionRS-232 Modem Port RS-232 Modem Connection DB-9FDB-9M GPI “Interface” Connector Powering UpGeneral Purpose Interface GPI DB-9M Level Meters & Processing Bargraphs Chapter-2 Getting To Know Your OmniaONEThe OmniaONE User Interface Headphone Level ControlProcessing Meter Display Audio I/O Level DisplayAudio I/O Level Display Using the Jog Wheel Preset Processing Input/Output Administrative Main MenuThe OmniaONE Main Menu offers five selections Proper Setting of Input Levels A Word About Density, Clarity, and Intelligibility Chapter-3 Getting The Sound You WantQuality Versus Density Increasing Density/Loudness Equalization EQ Changes Adding More Detail-When Loudness Isn’t The Last Word3. Increase the Release setting in the Low Frequency Limiter Thunder Bass2. Increase the Drive to Low Frequency Limiter Chapter-4 Main Menu Selections PresetProcessing Delete Preset Save PresetPre-processing Rename PresetAdjust Processing ExitEnhancers Mid Drive Xover CrossoverLow Band AGC Low DriveLow Band Limiter Mid Band AGCPres Band AGC Presence Band AGC High Band AGCMixer Mid Band LimiterPresence Band Limiter High Band LimiterSen Level Sensus→ Level Sensus→Hi Band Sen Freq Sensus→ FrequencyIMPORTANT NOTE Final LimitInput/Output Input Mtr Select Meter SelectInvert Output Bypass Save IO ConfigRename IO Config AdministrativeLoad IO Config Delete IO ConfigContrast Network ConfigurationReboot AboutLock Front Panel OmniaONE Multicast - Use and Operation Manual - Version OmniaONE Multicast Appendix A Performance SpecificationsGPI Interface Configuration Four fully optoisolated inputs Shipping Weight 10 lbs. / 4.54 kg OmniaONE Multicast - Use and Operation Manual - Version Diagnostic and Error Messages Appendix B Troubleshooting/Service/WarrantyElectrical and mechanical safety note 3. Unit will not boot Narrowing down problemsVia Phone & Mail USA and non-European Countries Obtaining ServiceVia the World Wide Web Via E-MailWarranty OmniaONE Multicast - Use and Operation Manual - Version Trigger Scripts Appendix C Remote Control & Software Update ProcedureRemote Control Software Update Procedure7. Click the Status Page link Return to Configuration. Reboot Processor