New Media Technology Omnia ONE Multicast manual Audio I/O Level Display, Processing Meter Display

Audio I/O Level Display

Either input or output levels can be displayed. The highest LED illuminated indicates digital sample-accurate peak signal levels. The meters are calibrated in decibels below full scale digital (0 dBFS), which is the absolute maximum level in the digital domain.

Audio I/O Level Display

Processing Meter Display

In “Meter Display” Mode the vertical bargraphs show all of the processing activity of the AGC and Limiter sections within the OmniaONE. If the menu is currently displayed on the OmniaONE’s LCD screen, press and hold the jog- wheel for two seconds and the processing meter display should appear as shown below.

To return to the menu display mode simply click the jog wheel once. (See “Using the Jog Wheel” on the next Page)

Notes: For any meter, a change from a solid bar to a checkerboard pattern indicates a “gated” condition in that band. The wideband AGC and four-band AGCs will recover to a resting gain setting which coincides with the RTZ (Return To Zero) levels set for each band.

The bargraph for the final limiter (F) may not indicate any G/R, but it is operating. This is due to the very fast peak timing that is employed, which may be occurring faster than the screen is updated.

Processing Meter Display

AGC Meters	Limiter Meters
WB…. Wide Band	L….. Low Band
L……. Low Band	M…. Mid Band
M…… Mid Band	P….. Presence Band
P…… Presence Band	H….. High Band
H…… High Band	S……Sensus→
	F……Final Limiter

OmniaONE Multicast - Use and Operation Manual – Version 0.90

23