New Media Technology Omnia ONE Multicast OmniaONE Multicast - Use and Operation Manual - Version

Page 61
Return to Configuration. Reboot Processor.

8.If your back button worked, select the link: “Select New Software (Configuration Page)” If not, log back into the Omnia (default password is “omnia” (all lower case) and from the Main Menu or the navigation menu at the top of the screen, select “Configuration”.

9.A reboot is required to activate the new software, and this will interrupt the audio. You can now opt to change the current bank, (to activate the new software) Apply and reboot or keep running the current software and reboot later.

To activate the new version now:

From the “Select Software Bank:” section, select the Bank that contains the new software version and click the “Apply” button. A new page should appear with the following options:

Software bank “x” selected. (Where “x” is the number of the software bank you just selected: 0 or 1)

Return to Configuration. Reboot Processor.

To activate the selected bank now, click the Reboot Processor option. The processor will reboot and the new software will be activated.

Once activated its version should show now as the “Running Software:” version.

To continue running the previous version, click Return to Configuration instead. When you are ready to activate it return to the Configuration page and repeat Step 9.

10. You may now close your browser. The software update is complete.

OmniaONE Multicast - Use and Operation Manual – Version 0.90

61

Image 61
Contents Omnia ONE Multicast Installation and Operation Manual Version 0.9i / MarchAudio Processor with Omnia 2101 Superior Avenue Cleveland, Ohio 44114 USAOmniaONE Multicast - Use and Operation Manual - Version January Welcome to Omnia.ONEOmniaONE Multicast - Use and Operation Manual - Version Headphone Jack OmniaONE Quick-Start SetupHeadphone Level Control Jog WheelTable Of Contents Administrative PresetChapter-4 Main Menu Selections ProcessingAppendix A Performance Specifications Overview Sensus→ Technology Audio Processingx3Codec Provisioning MulticastOmniaONE Multicast and HD→ Radio Important Note So… what’s so smart about Sensus→?Sincerely The Omnia Development TeamS A F E T Y I N S T R U C T I O N S The Exclamation Point HAZARD / WARNING LABELSThe Lightning Flash With with the EU RoHS Directive Manual Update Notification Pre-Installation Tasks Chapter-1 InstallationAC Power Environment About This ManualOmniaONE utilizes an un-switched EMI-filtered IEC power-entry module Installation & ConnectionsRear Panel Connections A Note About Relative PhaseAnalog Audio Inputs and Outputs Ethernet 10BaseT/100BaseT Remote and Livewire I/O Ethernet ConnectionRS-232 Modem Port RS-232 Modem Connection DB-9FDB-9M GPI “Interface” Connector Powering UpGeneral Purpose Interface GPI DB-9M The OmniaONE User Interface Chapter-2 Getting To Know Your OmniaONEHeadphone Level Control Level Meters & Processing BargraphsProcessing Meter Display Audio I/O Level DisplayAudio I/O Level Display Using the Jog Wheel Preset Processing Input/Output Administrative Main MenuThe OmniaONE Main Menu offers five selections Proper Setting of Input Levels A Word About Density, Clarity, and Intelligibility Chapter-3 Getting The Sound You WantQuality Versus Density Increasing Density/Loudness Equalization EQ Changes Adding More Detail-When Loudness Isn’t The Last Word3. Increase the Release setting in the Low Frequency Limiter Thunder Bass2. Increase the Drive to Low Frequency Limiter Chapter-4 Main Menu Selections PresetProcessing Delete Preset Save PresetAdjust Processing Rename PresetExit Pre-processingEnhancers Low Band AGC Xover CrossoverLow Drive Mid DrivePres Band AGC Presence Band AGC Mid Band AGCHigh Band AGC Low Band LimiterPresence Band Limiter Mid Band LimiterHigh Band Limiter MixerHi Band Sensus→Sen Freq Sensus→ Frequency Sen Level Sensus→ LevelIMPORTANT NOTE Final LimitInput/Output Input Mtr Select Meter SelectInvert Output Bypass Save IO ConfigLoad IO Config AdministrativeDelete IO Config Rename IO ConfigReboot Network ConfigurationAbout ContrastLock Front Panel OmniaONE Multicast - Use and Operation Manual - Version OmniaONE Multicast Appendix A Performance SpecificationsGPI Interface Configuration Four fully optoisolated inputs Shipping Weight 10 lbs. / 4.54 kg OmniaONE Multicast - Use and Operation Manual - Version Diagnostic and Error Messages Appendix B Troubleshooting/Service/WarrantyElectrical and mechanical safety note 3. Unit will not boot Narrowing down problemsVia the World Wide Web Obtaining ServiceVia E-Mail Via Phone & Mail USA and non-European CountriesWarranty OmniaONE Multicast - Use and Operation Manual - Version Remote Control Appendix C Remote Control & Software Update ProcedureSoftware Update Procedure Trigger Scripts7. Click the Status Page link Return to Configuration. Reboot Processor