Operating Instructions, Connect the Cord

4 - OPERATING INSTRUCTIONS

4-1. CONNECT THE CORD

1.Ensure the cord is NOT plugged into a receptacle before this procedure.

2.Make a loop with 8”- 10” (20 - 25cm) of the end of the extension cord.

3.Place the loop into the slots (A) under the motor hous- ing and lock into place as shown in Figure 4-1.

4.Connect the extension cord to the trimmer.

5.Plug the extension cord into a receptacle ONLY when you are ready to operate the trimmer.

4-1

4-2. ADJUST THE ASSIST HANDLE

NOTE: The assist handle is attached to the shaft but has been turned under for packing

1.Loosen adjustment knob and rotate handle to the top of shaft (Figure 4-2).

2.Tighten adjustment knob securely.

4-3. TRIMMER OPERATION

1.TRIMMING / MOWING (Figure 4-3A). Swing trimmer with a sickle-like motion from side to side. Do not tilt the stringhead during the procedure. Test area to be trimmed for proper cutting height. Keep stringhead at same level for even depth of cut.

4-3A

2.CLOSER TRIMMING (Figure 4-3B). Position trimmer straight ahead with a slight tilt so bottom of stringhead is above ground level and string contact occurs at proper cutting point. Always cut away from operator. Do not pull trimmer in toward operator.

3.FENCE/FOUNDATION TRIMMING. Approach trim- ming around chain link fences, picket fences, rock walls and foundations slowly to cut close without whip- ping string against the barrier. If the string comes in contact with rock, brick walls, or foundations, it will break or fray. If string snags fencing, it will snap off.

4.TRIMMING AROUND TREES. Trim around tree trunks with a slow approach so string does not contact bark. Walk around the tree trimming from left to right. Approach grass or weeds with the tip of the string and tilt stringhead slightly forward.

5.SCALPING Scalping refers to removal of all vegeta- tion down to the ground. To do this, tilt the stringhead to about a 30 degree angle to the left. By adjusting the handle you will have better control during this opera- tion. Always keep a distance of 50 feet (15 meters) from other people and animals when scalping. Do not attempt this procedure if there is any chance flying debris could injure operator, other people or cause damage to property.

6.SWEEPING - DO NOT SWEEP WITH TRIMMER (Figure 4-3C)

4-3C

4-2

4-3B

MCT2303A specifications

The McCulloch MCT2303A is a versatile and robust chainsaw designed for both professional landscapers and DIY enthusiasts. Its powerful engine and user-friendly design make it an ideal tool for tackling various cutting tasks ranging from light pruning to heavy-duty tree felling.

One of the standout features of the MCT2303A is its reliable 23cc two-stroke engine, which delivers substantial power for efficient cutting performance. With a maximum speed of 12,000 RPM, this chainsaw offers high cutting speeds, enabling users to work quickly without sacrificing quality. The engine is designed for low emissions and reduced fuel consumption, making it an environmentally friendly choice compared to its competitors.

The MCT2303A comes equipped with a 12-inch guide bar and a chain that ensures smooth and precise cuts. The combination of the bar length and the powerful engine makes it suitable for both small-scale tasks and larger jobs that require more cutting power. Furthermore, the chainsaw features an automatic chain lubrication system, which keeps the chain lubricated during operation, reducing wear and ensuring longer life.

Safety is paramount when using chainsaws, and the McCulloch MCT2303A incorporates several safety features. These include a chain brake that stops the chain instantly in case of kickback, as well as a throttle lock that prevents accidental activation during handling. An ergonomic handle provides comfort and a secure grip, allowing users to handle the chainsaw with confidence during extended periods of use.

Another notable characteristic of the MCT2303A is its lightweight design, weighing just under 6.5 pounds, which enhances maneuverability and reduces user fatigue. This makes it an excellent choice for tasks that require precision and control, allowing users to reach elevated branches and tight spots with ease.

In terms of maintenance, the McCulloch MCT2303A is designed for easy access to the air filter and spark plug, simplifying routine checks and replacements. This feature ensures that users can keep the chainsaw in optimal condition, further extending its lifespan.

Overall, the McCulloch MCT2303A combines power, safety, and user-friendly features, making it a reliable tool for anyone looking to manage their outdoor tasks effectively. Whether you are trimming hedges, cutting firewood, or felling small trees, this chainsaw is equipped to handle it all.