McCulloch MCT2027 user manual Maintenance Instructions, Replace the Spool of Nylon Line

Page 6

5 - MAINTENANCE INSTRUCTIONS

5 - MAINTENANCE INSTRUCTIONS

5-1. REPLACE THE SPOOL OF NYLON LINE

1.Unplug the trimmer.

2.Remove the spool assembly from the trimmer. To do so, hold the outer ribbed part of the assembly with one hand, while pushing down and turning the spool head with the other to unlock it. (Fig. 5-1A & Fig. 5-1B) The spool carrier and spool will now disassemble easily.

NOTE: There is a spring inside the spool head that could easily be lost. Insure that it is put in a safe place.

5-1C

6.Lock the ends of the line in opposite slots on the spool (Fig. 5-1F). Place the clear plastic line retainer back over the line and spool (Fig. 5-1G). Pull the lower line up into the lower slot in the clear plastic line retainer (Fig. 5-1H). Pull the upper line down into the upper slot (Fig. 5-1I).

7.Insert the line through each eyelet in the spool carrier and slide the spool into the carrier. (Fig. 5-1J) NOTE: Insure that the line is within the clear plastic line retainer. If it's outside of the clear plastic line retainer, the line will not feed.

8.Make sure to insert the spring, assemble the spool and spool carrier back onto the trimmer. To do so, push the head on and turn it clockwise until it locks. (Fig. 5-1K and Fig. L)

5-1A

5-1B

3.Remove the clear plastic line retaining ring. Remove any existing line from the spool.

4.Using 0.065" replacement line measure off approxi- mately 14' of line. Double over the cutter line into two equal lengths and place loop in slot of the spool divider (Fig. 5-1C).

5.Wind the line onto the spool by turning the spool. The line should go on in the direction of the arrow (A) on the spool (Fig. 5-1D). Line should be wrapped tightly around the spool. The line is wound with each half separated by the divider. Tightly wind it until there is about 6" of line left (Fig. 5-1E).

A

5-1D

5-1E

5-1F

5-1J

5-1G

5-1K

5-1H

5-1L

5-1I

10

11

Image 6
Contents Alto USAGeneral Information SpecificationsIntroduction String HeadInternational Symbols Safety PrecautionsExplanation of NOTE, WARNING, and Warranty Symbol Save These InstructionsAssembly Instructions Operating Insyructions Connect the CordTrimmer Operation Maintenance Instructions Replace the Spool of Nylon LineMaintenance Instructions ONE Year Limited Warrnaty MaintenanceTailleuse à gazon Électrique Caracteristiques AvertissementGeneralites Measures DE Securite TableauSymboles Internationaux Conserver CES InstructionsAucune Pièce Interne Nest Réparable PAR Lutilisateur Votre Instructions Pour Montage Instructions D’UTILISATION Branchement DU Cordon PROLON- GateurFonctionnement DU COUPE-HERBE Remplacement DE LA Bobine DE FIL DE Nylon EntretienEntretien Garantie Limitée DE UN Année EntretienIntroduccion Favor DE LeerEspecificaciones Renseignments Generaux Precautiones DE SeguridadAdvertencia TablaConserve Estas Instrucciones Explicacion DE NOTA, Adverten CIA Y Simbolo DE GarantiaSimbolos Internacionales Instrucciones DE Enemblado Instrucciones DE Operacion Conectar EL CableOperación DEL Cortador ORIL- Lador Instrucciones DE Maintenimiento Sustitución DEL Carrete DEL Cable DE NylonPrecaucion Instrucciones DE Maintenimiento Garantía Limitada DE UN AÑOMaintenimiento 14/2007

MCT2027 specifications

The McCulloch MCT2027 is a versatile and efficient chainsaw designed for trimming, cutting, and pruning tasks in your garden or backyard. It combines powerful performance with lightweight design, making it an ideal choice for both amateur gardeners and professional landscapers. One of the standout features of the MCT2027 is its robust 27cc 2-stroke engine, delivering impressive power while ensuring efficient fuel consumption. This engine design not only provides the necessary torque for tough cutting jobs but also adheres to modern emission standards, allowing for a more environmentally friendly operation.

The chainsaw is equipped with a 12-inch cutting bar, ideal for handling a variety of tasks, from cutting firewood to managing overgrown branches. The low kickback chain enhances safety during use, making it suitable for both novices and seasoned users. Additionally, the chain is designed for quick adjustments and easy replacement, which adds to the overall convenience of the tool.

One of the key technologies incorporated into the McCulloch MCT2027 is the Easy Start system. This innovative feature reduces the effort needed to start the chainsaw, allowing for quicker ignition and reducing user fatigue. The tool is also fitted with a soft grip handle and an ergonomic design, enhancing comfort during extended use and improving overall handling.

Another essential characteristic of the MCT2027 is its automatic chain lubrication system. This feature ensures that the chain remains lubricated during operation, minimizing wear and tear and extending the life of the saw. The transparent oil tank allows users to easily monitor oil levels, providing peace of mind while working.

The overall weight of the McCulloch MCT2027 is designed for ease of use without compromising power. It strikes a balance that allows the operator to maneuver the chainsaw effortlessly. This characteristic is particularly beneficial for tasks that require precision and control, such as tree pruning or landscaping.

In summary, the McCulloch MCT2027 is an outstanding chainsaw that merges power with user-friendly features. Its combination of a potent engine, lightweight design, and innovative technologies makes it an excellent choice for anyone looking to efficiently maintain their outdoor spaces. Whether you are an experienced user or a beginner, the MCT2027 offers the performance and convenience required to tackle various cutting tasks with ease.