Sears 831.105021 user manual Uct

Page 5

33.WARNING—To reduce the risk of injury: It is especially important for persons over the

age of 35 or persons with pre-existing health problems, such as obesity, heart disease, high or low blood pressure, circulatory prob- lems, or diabetes to consult their physician before using this product.

34.WARNING—The included warning sign must

be posted where all users of the spa can see and read it (see POSTING THE WARNING SIGN on page 13).

35. CAUTION—The hydrotherapy spa is not

designed for in-ground installation. Do not install the hydrotherapy spa in-ground.

36.WARNING—Disconnect the electric power supply before servicing the spa.

37.If you feel pain or dizziness at any time while using the hydrotherapy spa, discontinue use and contact a physician.

38.Minimum Electrical Ratings:

240 Volt Minimum Supply Conductor

Ampacity: 40 Amps

240 Volt Minimum Breaker/Fuse: 40 Amps

39.A green terminal or a terminalmarked

G, GR, Ground, Grounding, or with the symbol is located inside the supply terminal box or compartment. To reduce the risk of electric shock, this terminal must be con- nected to the grounding means provided in the electric supply service panel with a con- tinuous copper wire equivalent in size to the circuit conductors supplying this equipment.

40. WARNING DECAL PLACEMENT: Locate the

decals at right and familiarize yourself with this information.

Continuous exposure of the spa surface to direct sunlight or ultra-violet rays may cause damage to the spa’s surface, will void the warranty, and will result in potentially hazardous surface temperatures.To avoid sun damage, the cover should be in place when the spa is not in use.

WARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this prod-

uct.

SAVE THESE INSTRUCTIONS

5

Image 5
Contents 800 Model No Serial NoTable of Contents SPA Important Safety InstructionsUse the hydrotherapy spa only as described This manual Important Do not allow the hydrotherapyMust always be open Up the hydrotherapy spa within five feetMinimum No AWG 13.3 mm Uct Console Spa Shell Light Spa Cover Access Filter Fully before using the RenewBefore YOU Begin Privacy of your own homeChoosing a Location for the Hydrotherapy SPA If you set up the hydrotherapy spa insideIf you set up the hydrotherapy spa outside Assembly Requires the Following SET-UP and AssemblySpa to be used before the warning sign is posted Do not overfillSpa Starting the Hydrotherapy SPA Testing and Treating the WaterPlugging in the Hydrotherapy SPA Six uni-directional thera-jets SPA Shell Diagram SPA OperationSuction vent Ozone jetCord must be unplugged Light Button Console DiagramOr heating the water as needed Attaching the RED and Blue Light Covers Posting the Warning SignSecuring the SPA Cover Maintenance Never mix different chemicals Access Panel ScrewsAlways store chemicals in a cool, dry place Maintaining the Proper PH BalanceOpening and Closing the CUT-OFF Valves Draining the Hydrotherapy SPAHydrotherapy spa should always be covered Checking and Cleaning the Filter Converting the SPA to a 240 Volt Power SourceAdjusting the Filter Diverter Winter USE and CareSymptom the Pump Hums Symptom the SPA will not OperateSymptom the Water does not Heat Trouble -SHOOTINGSome water loss due to evaporation is normal Symptom the Water Level DropsKey No. Qty Description Part LIST-Model NoExploded DRAWING-Model No Page Page Limited Five Year Massage SPA Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R1200A