Sears 831.105021 user manual Posting the Warning Sign, Securing the SPA Cover

Page 13

SECURING THE SPA COVER

To secure the spa cover, snap the latches on the spa cover into the buckles on the side panels.

ATTACHING THE RED AND BLUE LIGHT COVERS

The spa comes with red and blue light covers for the spa

To lock the buckles, insert the key and turn it clockwise 1/4 turn. To unlock the buckles, insert the key and turn it counter- clockwise 1/4 turn.

Latch

Buckle

Key

light. To attach one of the light covers, cen- ter it over the spa light and press it into place.

Light

Cover

Light

Always keep the buckles locked when the spa is

not in use. Keep the keys in a safe place, out of the reach of children.

POSTING THE WARNING SIGN

The included warning sign, shown below, must be posted on a wall or fence where it will be visible to all

users of the spa.	Whenever the spa is moved, the sign must also be moved and reposted near the spa. If the
sign becomes lost or illegible, call our toll-free Customer Hot Line at		SEARS 1-800-4MYHOME (469-4663), or
SEARS 1-877-LEFOYER (533-6937) 24 hours a day		to obtain a free replacement sign. Post the sign as
described above.

DURING PREGNANCY, SOAKING IN HOT WATER MAY CAUSE

DAMAGE TO THE FETUS. LIMIT USE TO 10 MINUTES AT A TIME.

PREVENT DROWNING

•Spa heat speeds up the effect of alcohol, drugs, or medicine and can cause unconsciousness.

•Immediately leave spa if uncomfortable or sleepy.

PREVENT CHILD DROWNING

•Water attracts children.

•Always attach spa cover after each use.

13

Image 13

Contents 800 Model No Serial NoTable of Contents SPA Important Safety InstructionsUse the hydrotherapy spa only as described This manual Important Do not allow the hydrotherapyMinimum No AWG 13.3 mm Up the hydrotherapy spa within five feetMust always be open Uct Console Spa Shell Light Spa Cover Access Filter Fully before using the RenewBefore YOU Begin Privacy of your own homeIf you set up the hydrotherapy spa outside If you set up the hydrotherapy spa insideChoosing a Location for the Hydrotherapy SPA Assembly Requires the Following SET-UP and AssemblySpa Do not overfillSpa to be used before the warning sign is posted Plugging in the Hydrotherapy SPA Testing and Treating the WaterStarting the Hydrotherapy SPA Six uni-directional thera-jets SPA Shell Diagram SPA OperationSuction vent Ozone jetOr heating the water as needed Console DiagramCord must be unplugged Light Button Securing the SPA Cover Posting the Warning SignAttaching the RED and Blue Light Covers Maintenance Never mix different chemicals Access Panel ScrewsAlways store chemicals in a cool, dry place Maintaining the Proper PH BalanceHydrotherapy spa should always be covered Draining the Hydrotherapy SPAOpening and Closing the CUT-OFF Valves Checking and Cleaning the Filter Converting the SPA to a 240 Volt Power SourceAdjusting the Filter Diverter Winter USE and CareSymptom the Pump Hums Symptom the SPA will not OperateSymptom the Water does not Heat Trouble -SHOOTINGSome water loss due to evaporation is normal Symptom the Water Level DropsKey No. Qty Description Part LIST-Model NoExploded DRAWING-Model No Page Page Limited Five Year Massage SPA Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R1200A