SERVICE AND ADJUSTMENTS
: | H,,H',,,'H'I= 'l",' 11,1" I | 111'111= |
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
Depress clutch/brake pedal fully and set parking brake.
o
o o
o
o
o
Place motion control lever in neutral (N) position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key,
Make sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TRACTOR
TO REMOVE MOWER (See Fig, 21)
Mower will be easier to remove from the right side of tractor.
•Place attachment clutch in "DISENGAGED" position_
,Move attachment lift lever forward to lower mower to its lowest position.
°Roll belt off engine pulley_
°Disconnect clutch rod from clutch lever by removing retainer spring_
,Disconnect
•Disconnect suspension arms from rear deck brackets by removing retainer springs,
°Disconnect front links from deck by removing retainer springs_
•Raise lift lever to raise suspension arms. Slide mower out from under tractor_
IMPORTANT: | tF AN ATTACHMENT OTHER THAN THE | |
MOWER | fS TO | BE MOUNTED TO THE TRACTOR, |
REMOVE | THE FRONT LINKS. |
TO INSTALL MOWER (See Fig. 21)
•Raise attachment lift lever to its highest position.
•Slide mower under tractor with discharge guard to right side of tractor
•Lower lift lever to its lowest position.
°install mower in reverse order of removal instructions_
ILEVER
CLUTCH
RETAINER
RETAINER
SPRING
RETAINER
SPRINGS (BOTH SIDES)
FiG. 21
2'1