Parasound Halo C1 Controller manual Circular thumbpad on the Master remote changes the C

Page 19

USING THE MASTER AND SIDEKICK REMOTES continued

19

 

 

 

•Like the STATUS button on the front panel of the C 1, the STATUS button on the Master remote and the INFO button on the SideKick can be pressed to show the current main-zone operating sta- tus (source, audio and video signal types, audio mode, and volume setting) on the C 1 controller’s front-panel display or on any video projector or monitor connected to the “OSD” video output jacks. The status information will be shown for 5 seconds. Status information will only be shown on the front-panel display if it is turned on in status mode or is in video-preview mode and “Superimpose” has been selected in Display Setup (page 34). This information will also appear on any TV set or pro- jector connected to the composite or S-Video “OSD” output jacks on the rear panel of the C 1.

 

CD

2

•The circular thumbpad on the Master remote changes the C

 

1 source input in either of two ways. Rocking it to the right or

 

 

 

 

AUDIO

 

 

 

left makes the C 1 scan up or down through its input choices;

Signal

Digital PCM

the scan ends when you release the thumbpad. Pressing the

Input:

Coaxial

2

Mode

Dolby PLII

Music

center of the pad starts or stops Autosearch of all source

VIDEO

 

 

 

inputs currently receiving video or digital audio input signals.

Signal

No

signal

Input

Auto

2

•The FAV button on the Master remote, though normally

 

 

 

 

programmed to help you find your favorite TV or satellite channels, can also be programmed for other favorite activi- ties of yours. These can be single commands or complex

macros (series of up to 190 commands) that handle a sequence of events with one push of a button. A FAV macro might, for example, turn on your video projector and satellite tuner, lower the screen, select the appropriate C 1 input, close the draperies, and dim your room lights.

•The MENU button, when any C1/C2 page is active, will bring up the Setup menus for the C 1; their uses will be covered in the next chapter.

Off

 

 

 

On

 

 

Mute

Volume +

Volume –

 

 

Off

 

 

 

 

On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Thumbpad

 

 

Volume +

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume –

 

 

 

 

Mute

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: The printed buttons on either remote can be programmed for any single function or multi- step macro. If your remotes have been reprogrammed, some of these descriptions may no longer apply.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Controller Congratulations, and Thank You for Choosing Parasound Thank YOUParasound Staff Keeping Records for Future Reference Table of Contents Rack Mounting Your Parasound C Unpacking and Placement Guidelines for the CPlacement Guidelines Unpacking Your CMaking Connections a Preview Getting StartedGetting Started AC Connection and PowerN t r o l l e r Controls and OperationGetting Started Main Operations On-Off, Volume, Source Selection Using the Main ControlsOn-Off Volume and Muting Using the Main ControlsChanging Your Listening and Viewing Source Using Audio RecordersSelecting Sound Patterns Listening Modes Online Sources for Further Information DTS Listening Modes and the Signals They Work WithDual-Zone Operation Using the Status and Info Buttons and the DisplaysMaster Remote and the C 1 Controller Using the Master and Sidekick RemotesUsing the Master and Sidekick Remotes Printed Buttons and the C Using the Master and Sidekick Remotes2 of the C1/C2 Menu 3 of the C1/C2 MenuCircular thumbpad on the Master remote changes the C Controlling Other Components In Your System Using the SideKick For Further Information Navigating the Setup Menus ADJUSTMENTS, MENUS, and SetupADJUSTMENTS, MENUS, and Setup Dolby/DTS Setup Audio SetupWoofers sound distorted and could, in very rare cases Preset SetupSpeaker Setup Distance Setup Level SetupAux Programmable Channel Setup Programming Aux Channels 9 Ch 9 or 10 Config Setup brings up this submenuMix Levels Level and Distance Autocalibrate Front-panel knob on the C2. When you have changed Source SetupPlay some music that you know has high peak levels, Ntsc Display SetupTHX Audio Setup Trigger SetupParasound Halo Setup Halo Setup SoftwareConnection Types Connecting Audio and Video Sources and RecordersGeneral Rules When Connecting Sources to the C Connecting Audio and Video Sources and RecordersConnecting a DVD Or Other Video Source Component to the C Connecting a CD or Other Audio Source Component to the CWhat You May Need Component Component Video Inputs and Outputs Connecting a Multichannel Source to the COutput Connecting a Balanced-Output Audio SourceComposite Video Digital Audio Record Out Outputs Connecting RecordersAnalog Recording Via the Tape Monitor Jacks Connecting a Digital Audio Recorder Video Inputs Video Outputs Connecting a Video RecorderMain Audio Outputs Connecting the Audio and Video OutputsAmplifier Alternatives Connecting the Audio and Video OutputsConnecting Video Displays Connecting the Audio and Video OutputsParasound Products, Inc Connecting a Second Entertainment ZoneProgramming New Channels Input/Output Summary RS-232 Control Control ConnectionsIR Inputs Volt Triggers Control ConnectionsTrouble Probable Cause Remedy Troubleshooting GuideHeadphones Troubleshooting GuideRemote control does Important Notice Shipping the C Procedure for Returning your C 1 to Parasound for ServiceServicing Your C If All Else Fails Call Us for HelpBalanced and Unbalanced Analog Audio Connections Technically SpeakingPreventing or Minimizing Hum and Buzz Technically SpeakingUsing Unmatched Power Amplifiers Helpful Web Addresses Audio and Video Circuit Path Topologies Parasound C 1 Design OverviewParasound C 1 Design Overview Parasound C 1 Specifications Index Index Parasound Products, Inc Battery Street, San Francisco, CA

Halo C1 Controller specifications

The Parasound Halo C1 Controller emerges as a premium choice for audio enthusiasts seeking high-performance home theater solutions. This exceptional product combines innovative technology with user-friendly features, ensuring an unparalleled listening experience for both music and movie lovers.

At its core, the Halo C1 Controller serves as a powerful preamplifier and processor, designed to manage and control audio and video signals effectively. It is equipped with a balanced XLR input and multiple RCA inputs, allowing seamless integration with various audio sources. With support for high-resolution audio formats, including PCM and DSD, the Halo C1 delivers pristine sound quality that enhances the listening experience.

One of the defining characteristics of the Halo C1 is its advanced digital processing capabilities. The unit features Dolby Digital and DTS decoding, along with several proprietary audio technologies that elevate its performance. Its ability to upmix stereo signals into multi-channel formats contributes to an immersive surround sound experience, making it an ideal companion for both music playback and movie watching.

The Halo C1 also boasts an intuitive user interface, complete with an easy-to-navigate on-screen display. This feature simplifies the setup and configuration process, allowing users to personalize their audio experience to suit their preferences. For added convenience, the C1 supports remote control operation, enabling users to adjust settings without leaving their seats.

In terms of connectivity, the Halo C1 provides an impressive array of options. It includes HDMI inputs and outputs, ensuring compatibility with modern AV equipment and facilitating the transmission of high-definition video alongside high-fidelity audio. Additionally, it features variable and fixed outputs, making it adaptable for different system configurations.

Another standout feature of the Halo C1 is its robust power supply. The unit employs a toroidal transformer, ensuring clean and stable power delivery that translates into superior sound performance. This design choice minimizes power supply noise, which can adversely affect audio quality.

In conclusion, the Parasound Halo C1 Controller is a sophisticated and versatile audio solution that caters to both audiophiles and home theater enthusiasts. With its exceptional performance, advanced technology, and user-friendly features, the Halo C1 stands out as a key component for creating a high-quality audio and video experience in any home entertainment system. Its ability to adapt and enhance the listening experience makes it a worthy investment for anyone serious about sound quality.
Top Page Image Contents