Parasound Halo C1 Controller Preset Setup, Woofers sound distorted and could, in very rare cases

Page 26
26 ADJUSTMENTS, MENUS, AND SETUP continued
Bass Limiter Setup

Bass limiter setup

 

The bass in today’s film soundtracks is often far louder

 

than it is on music recordings or older films. Handling

 

 

 

Bass limiter

Off

these loud bass tones can make many smaller sub-

Limiter

level

—11dB

woofers sound distorted and could, in very rare cases,

Limiter

noise

Off

even damage them. The bass limiter puts a cap on sub-

Exit

woofer output levels, to prevent this. Because Halo C 1

 

 

owners are apt to have large, high-output subwoofers that

 

don’t need this protection, the factory default is “Off.” If

 

you ever do hear distorted bass from your sub, however,

 

you can turn the C 1 Bass Limiter on and set its level to

match your subwoofer’s capabilities. (The bass limiter is not needed with subwoofers meeting THX Ultra2 standards, so it is not available if you selected such a sub under “THX Audio Setup.”)

To set the bass limiter, first press the MENU button on the C 1 front panel or the thumbpad on the Master remote to move the cursor to “Limiter noise,” then rock the thumbpad or turn the front- panel knob one click to switch the noise on. This will feed a low-frequency signal to your subwoofer.

Next, move to “Limiter level” and rock the thumbpad sideways or turn the front-panel knob to raise the noise level until you just start to hear distortion from your subwoofer. Using the thumbpad or front-panel controls, turn the noise off and the bass limiter on.

Preset Setup

Preset setup

Preset

Treble

Bass

Center

Surround

Subw

Exit

1

0dB

0dB

0dB

0dB

0dB

The preset menu lets you create up five different sound profiles, each with its own memorized combination of Treble, Bass, Center level, Surround level, and Sub level adjustments. Each preset can then be assigned to one or more specific inputs in the “Source Setup” menu. This gives you a way to automatically compensate for the audio properties of different sources (especially analog sources such as cassette decks or VCRs that seem to need some help) or simply set preferences for each.

Preset is used to choose whichever of the five presets you want to adjust.

Treble and Bass override any treble and bass adjustments you may have made in the Audio Setup menu, but only for the input or inputs to which the preset is assigned. The range is from

–12 dB (cut) to +12 dB (boost).

Center, Surround, and Subw will, for any input assigned to a preset, raise or lower the levels in these channels by up to 12 dB relative to those selected in “Level Setup,” under the “Speaker Setup” menu.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Controller Parasound Staff Keeping Records for Future Reference Thank YOUCongratulations, and Thank You for Choosing Parasound Table of Contents Unpacking Your C Unpacking and Placement Guidelines for the CPlacement Guidelines Rack Mounting Your Parasound CGetting Started Making Connections a PreviewAC Connection and Power Getting StartedControls and Operation N t r o l l e rGetting Started On-Off Using the Main ControlsMain Operations On-Off, Volume, Source Selection Using the Main Controls Volume and MutingUsing Audio Recorders Changing Your Listening and Viewing SourceSelecting Sound Patterns Listening Modes Online Sources for Further Information Listening Modes and the Signals They Work With DTSUsing the Status and Info Buttons and the Displays Dual-Zone OperationUsing the Master and Sidekick Remotes Master Remote and the C 1 ControllerUsing the Master and Sidekick Remotes 3 of the C1/C2 Menu Using the Master and Sidekick Remotes2 of the C1/C2 Menu Printed Buttons and the CCircular thumbpad on the Master remote changes the C Controlling Other Components In Your System Using the SideKick For Further Information ADJUSTMENTS, MENUS, and Setup Navigating the Setup MenusADJUSTMENTS, MENUS, and Setup Audio Setup Dolby/DTS SetupPreset Setup Woofers sound distorted and could, in very rare casesSpeaker Setup Level Setup Distance SetupAux Programmable Channel Setup Mix Levels Ch 9 or 10 Config Setup brings up this submenuProgramming Aux Channels 9 Level and Distance Autocalibrate Source Setup Front-panel knob on the C2. When you have changedPlay some music that you know has high peak levels, Display Setup NtscTrigger Setup THX Audio SetupHalo Setup Software Parasound Halo SetupConnecting Audio and Video Sources and Recorders Connection TypesConnecting Audio and Video Sources and Recorders General Rules When Connecting Sources to the CWhat You May Need Connecting a CD or Other Audio Source Component to the CConnecting a DVD Or Other Video Source Component to the C Component Connecting a Multichannel Source to the C Component Video Inputs and OutputsConnecting a Balanced-Output Audio Source OutputConnecting Recorders Composite Video Digital Audio Record Out OutputsAnalog Recording Via the Tape Monitor Jacks Connecting a Digital Audio Recorder Connecting a Video Recorder Video Inputs Video OutputsConnecting the Audio and Video Outputs Main Audio OutputsConnecting the Audio and Video Outputs Amplifier AlternativesConnecting the Audio and Video Outputs Connecting Video DisplaysConnecting a Second Entertainment Zone Parasound Products, IncProgramming New Channels Input/Output Summary IR Inputs Control ConnectionsRS-232 Control Control Connections Volt TriggersTroubleshooting Guide Trouble Probable Cause RemedyTroubleshooting Guide HeadphonesRemote control does If All Else Fails Call Us for Help Procedure for Returning your C 1 to Parasound for ServiceServicing Your C Important Notice Shipping the CTechnically Speaking Balanced and Unbalanced Analog Audio ConnectionsTechnically Speaking Preventing or Minimizing Hum and BuzzUsing Unmatched Power Amplifiers Helpful Web Addresses Parasound C 1 Design Overview Audio and Video Circuit Path TopologiesParasound C 1 Design Overview Parasound C 1 Specifications Index Index Parasound Products, Inc Battery Street, San Francisco, CA

Halo C1 Controller specifications

The Parasound Halo C1 Controller emerges as a premium choice for audio enthusiasts seeking high-performance home theater solutions. This exceptional product combines innovative technology with user-friendly features, ensuring an unparalleled listening experience for both music and movie lovers.

At its core, the Halo C1 Controller serves as a powerful preamplifier and processor, designed to manage and control audio and video signals effectively. It is equipped with a balanced XLR input and multiple RCA inputs, allowing seamless integration with various audio sources. With support for high-resolution audio formats, including PCM and DSD, the Halo C1 delivers pristine sound quality that enhances the listening experience.

One of the defining characteristics of the Halo C1 is its advanced digital processing capabilities. The unit features Dolby Digital and DTS decoding, along with several proprietary audio technologies that elevate its performance. Its ability to upmix stereo signals into multi-channel formats contributes to an immersive surround sound experience, making it an ideal companion for both music playback and movie watching.

The Halo C1 also boasts an intuitive user interface, complete with an easy-to-navigate on-screen display. This feature simplifies the setup and configuration process, allowing users to personalize their audio experience to suit their preferences. For added convenience, the C1 supports remote control operation, enabling users to adjust settings without leaving their seats.

In terms of connectivity, the Halo C1 provides an impressive array of options. It includes HDMI inputs and outputs, ensuring compatibility with modern AV equipment and facilitating the transmission of high-definition video alongside high-fidelity audio. Additionally, it features variable and fixed outputs, making it adaptable for different system configurations.

Another standout feature of the Halo C1 is its robust power supply. The unit employs a toroidal transformer, ensuring clean and stable power delivery that translates into superior sound performance. This design choice minimizes power supply noise, which can adversely affect audio quality.

In conclusion, the Parasound Halo C1 Controller is a sophisticated and versatile audio solution that caters to both audiophiles and home theater enthusiasts. With its exceptional performance, advanced technology, and user-friendly features, the Halo C1 stands out as a key component for creating a high-quality audio and video experience in any home entertainment system. Its ability to adapt and enhance the listening experience makes it a worthy investment for anyone serious about sound quality.
Top Page Image Contents