Parasound Halo C1 Controller manual Using the SideKick

Page 21

USING THE MASTER AND SIDEKICK REMOTES continued

21

 

 

 

•PREV CH recalls the last cable or satellite channel you were watching, as long as your cable or satellite tuner supports this function.

•GUIDE commonly displays your satellite or cable company’s program guide.

•The numerical keypad can be used for channel selection, time setting on VCRs, direct frequency entry for tuning some FM/AM tuners, and so on. Not all its buttons will necessarily be used; for example, some TV tuners require the use of a +10 key when tuning to channels 11 and higher, or the use of an ENT (Enter) button for tuning to channel numbers with fewer than two or three digits, but others do not.

Using the SideKick™

The SideKick remote is set up at the factory to control the main functions of the C 1, but can be reprogrammed to control your entire home theater. If you or your dealer or installer have not reprogrammed it, it will work as follows:

LIGHT illuminates the SideKick’s buttons for about 10 seconds. If you wish to turn it off sooner, tap this button again.

VOL raises or lowers the volume setting on the C 1.

CH changes the C 1 Controller’s source input selection, but can be repro- grammed as a channel control for your TV, cable box, or satellite tuner.

MUTE cuts off output from the C 1 to your amplifiers and speakers. Normally, it controls the main zone (including the “Phones” jack on the front panel), but if the C 1 is in Zone control mode, it will cut off sound to your remote zone.

INFO presents on your on-screen video display, if you are using one, the current source’s name, audio and video input types, and audio mode. This information is shown for 10 seconds.

FAVORITE buttons A, B, and C can be programmed for many uses, depending on your home-theater habits. For example, if you mainly watch DVDs, a button could be programmed with a macro that turns on the C 1, DVD, and video screen and

sets the C 1 to its DVD input. Or if you mainly channel-surf, you can set the three buttons to bring up your three favorite channels. Because the possibilities, and the systems the C 1 and SideKick will be used with, vary so much, the FAVORITE buttons are programmed at the factory to do nothing in particular (they send the same signals as the Master Remote’s “1”, “2,” and “3” buttons do in C1/C2 mode). This leaves them free to be reprogrammed for you and your system.

The SideKick is an excellent choice for use in a second, remote, zone. The “Zone” command need not be programmed into it for this, as the C 1 has a control input specifically for use with commands from an IR repeater sensor in the remote zone. The SideKick’s OFF and ON buttons can be reprogrammed with macros to turn on the C 1 Controller’s Zone circuitry and any equip- ment (such as TV sets or amplifiers) in the second zone.

If your C 1 was set up by your dealer or installer, the SideKick has probably been programmed for your system and the way you use it. If not, you can program it very easily from your PC by downloading and running the MX-Editor software from our Web site. To program the SideKick, connect the programming cable to your computer and click the MX-Editor program’s SideKick tab; then, using your computer’s mouse, “drag” the functions you want from the pictured Master remote and “drop” them onto the SideKick buttons you wish to control them with.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Controller Thank YOU Congratulations, and Thank You for Choosing ParasoundParasound Staff Keeping Records for Future Reference Table of Contents Placement Guidelines Unpacking and Placement Guidelines for the CUnpacking Your C Rack Mounting Your Parasound CMaking Connections a Preview Getting StartedGetting Started AC Connection and PowerN t r o l l e r Controls and OperationGetting Started Using the Main Controls Main Operations On-Off, Volume, Source SelectionOn-Off Volume and Muting Using the Main ControlsChanging Your Listening and Viewing Source Using Audio RecordersSelecting Sound Patterns Listening Modes Online Sources for Further Information DTS Listening Modes and the Signals They Work WithDual-Zone Operation Using the Status and Info Buttons and the DisplaysMaster Remote and the C 1 Controller Using the Master and Sidekick RemotesUsing the Master and Sidekick Remotes 2 of the C1/C2 Menu Using the Master and Sidekick Remotes3 of the C1/C2 Menu Printed Buttons and the CCircular thumbpad on the Master remote changes the C Controlling Other Components In Your System Using the SideKick For Further Information Navigating the Setup Menus ADJUSTMENTS, MENUS, and SetupADJUSTMENTS, MENUS, and Setup Dolby/DTS Setup Audio SetupWoofers sound distorted and could, in very rare cases Preset SetupSpeaker Setup Distance Setup Level SetupAux Programmable Channel Setup Ch 9 or 10 Config Setup brings up this submenu Programming Aux Channels 9Mix Levels Level and Distance Autocalibrate Front-panel knob on the C2. When you have changed Source SetupPlay some music that you know has high peak levels, Ntsc Display SetupTHX Audio Setup Trigger SetupParasound Halo Setup Halo Setup SoftwareConnection Types Connecting Audio and Video Sources and RecordersGeneral Rules When Connecting Sources to the C Connecting Audio and Video Sources and RecordersConnecting a CD or Other Audio Source Component to the C Connecting a DVD Or Other Video Source Component to the CWhat You May Need Component Component Video Inputs and Outputs Connecting a Multichannel Source to the COutput Connecting a Balanced-Output Audio SourceComposite Video Digital Audio Record Out Outputs Connecting RecordersAnalog Recording Via the Tape Monitor Jacks Connecting a Digital Audio Recorder Video Inputs Video Outputs Connecting a Video RecorderMain Audio Outputs Connecting the Audio and Video OutputsAmplifier Alternatives Connecting the Audio and Video OutputsConnecting Video Displays Connecting the Audio and Video OutputsParasound Products, Inc Connecting a Second Entertainment ZoneProgramming New Channels Input/Output Summary Control Connections RS-232 ControlIR Inputs Volt Triggers Control ConnectionsTrouble Probable Cause Remedy Troubleshooting GuideHeadphones Troubleshooting GuideRemote control does Servicing Your C Procedure for Returning your C 1 to Parasound for ServiceIf All Else Fails Call Us for Help Important Notice Shipping the CBalanced and Unbalanced Analog Audio Connections Technically SpeakingPreventing or Minimizing Hum and Buzz Technically SpeakingUsing Unmatched Power Amplifiers Helpful Web Addresses Audio and Video Circuit Path Topologies Parasound C 1 Design OverviewParasound C 1 Design Overview Parasound C 1 Specifications Index Index Parasound Products, Inc Battery Street, San Francisco, CA

Halo C1 Controller specifications

The Parasound Halo C1 Controller emerges as a premium choice for audio enthusiasts seeking high-performance home theater solutions. This exceptional product combines innovative technology with user-friendly features, ensuring an unparalleled listening experience for both music and movie lovers.

At its core, the Halo C1 Controller serves as a powerful preamplifier and processor, designed to manage and control audio and video signals effectively. It is equipped with a balanced XLR input and multiple RCA inputs, allowing seamless integration with various audio sources. With support for high-resolution audio formats, including PCM and DSD, the Halo C1 delivers pristine sound quality that enhances the listening experience.

One of the defining characteristics of the Halo C1 is its advanced digital processing capabilities. The unit features Dolby Digital and DTS decoding, along with several proprietary audio technologies that elevate its performance. Its ability to upmix stereo signals into multi-channel formats contributes to an immersive surround sound experience, making it an ideal companion for both music playback and movie watching.

The Halo C1 also boasts an intuitive user interface, complete with an easy-to-navigate on-screen display. This feature simplifies the setup and configuration process, allowing users to personalize their audio experience to suit their preferences. For added convenience, the C1 supports remote control operation, enabling users to adjust settings without leaving their seats.

In terms of connectivity, the Halo C1 provides an impressive array of options. It includes HDMI inputs and outputs, ensuring compatibility with modern AV equipment and facilitating the transmission of high-definition video alongside high-fidelity audio. Additionally, it features variable and fixed outputs, making it adaptable for different system configurations.

Another standout feature of the Halo C1 is its robust power supply. The unit employs a toroidal transformer, ensuring clean and stable power delivery that translates into superior sound performance. This design choice minimizes power supply noise, which can adversely affect audio quality.

In conclusion, the Parasound Halo C1 Controller is a sophisticated and versatile audio solution that caters to both audiophiles and home theater enthusiasts. With its exceptional performance, advanced technology, and user-friendly features, the Halo C1 stands out as a key component for creating a high-quality audio and video experience in any home entertainment system. Its ability to adapt and enhance the listening experience makes it a worthy investment for anyone serious about sound quality.
Top Page Image Contents