Sears 917.25271 owner manual HOW to USE Your Tractor

Page 72

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over the spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 9)

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

•Depress clutch/brake pedal into full "BRAKE" position and hold.

•Place parking brake lever in "ENGAGED" position and release pressure from clutch/brake pedal. Pedal should

remain in "BRAKE" position. Make sure parking brake will hold vehicle secure.

ATTACHMENT CLUTCH SWITCH

PULL OUT TO "ENGAGE"

IGNITION KEY

PUSH-IN TO

"DISENGAGE"

CHOKE

CONTROL

THROTTLE

CONTROL

LEVER

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

i i i

CAUTION: Always stop tractor com- pletely, as described above, before leav- ing the operator's position; to empty grass catcher, etc.

llll

llll

i

TO USE THROTTLE CONTROL (See Fig. 9)

Always operate engine at full throttle.

•Operating engine at less than full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower perfor- mance.

TO USE CHOKE CONTROL (See Fig. 9)

Use choke control whenever you are starting acold engine. Do not use to start a warm engine.

•To engage choke control, pull knob out. Slowly push knob in to disengage.

 

 

MOTION

 

 

CONTROL

 

 

LEVER

CLUTCH/BRAKE

HEIGHT

PARKING BRAKE

PEDAL"DRIVE"

 

 

POSITION

ADJUSTMENT

"DISENGAGED"

 

KNOB

POSITION

FIG. 9

STOPPING (See Fig. 9)

MOWER BLADES -

•Move attachment clutch switch to "DISENGAGED" position.

GROUND DRIVE -

•Depress clutch/brake pedal intofull "BRAKE" position.

•Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES

NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

ENGINE -

•Move throttle control to slow (._l,) position.

NOTE: Failure to move throttle control to slow (-gait) position and allowing engine to idle before stopping may cause engine to "backfire".

•Turn ignition key to "OFF" position and remove key.

Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

TO MOVE FORWARD AND BACKWARD

(See Fig. 9)

The direction and speed of movement is controlled by the motion control lever.

•Start tractor with motion control lever in neutral (N) position.

•Release parking brake and clutch/brake pedal.

•Slowly move motion control lever to desired position.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 9)

The cutting height is controlled by turning the height adjust- ment knob in desired direction.

•Turn knob clockwise (F_I) to raise cutting height.

•Turn knob counterclockwise (P-_) to lower cutting height.

The cutting height range is approximately 1-1/2" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of

grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

12

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Page Safety Rules Safe Operation Practices for Ride-On MowersMaintenance Agreement Product SpecificationsLimited 90 DAY Warranty on Battery Contents Engine Maintenance PerformanceContents Tools Required for Assembly To Remove Tractor from CartonBefore Rolling Tractor OFF Skid Unpack CartonAssembly HOW to SET UP Your TractorPrepare Battery See Figs a and 2B Install Seat See FigCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemChecklist Install Mulcher PlateSee Figs a & 7B To Convert to Bagging or DischargingOperation Know Your TractorHOW to USE Your Tractor To Move Forward and BackwardBefore Starting the Engine To Operate Mower See FigTo Operate on Hills Check Engine OIL Level See FigADD Gasoline To Start Engine See FigPurge Transmission Mowing Tips Mulching Mowing TipsLubrication Chart General RecommendationsLub.caoncha Before Each USECustomer Responsibilities TractorBrake Operation TiresEngine Transaxle CoolingTransaxle Pump Fluid AIR Filter See FigCleaning Engine OIL FilterMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig Adjustments To Level Mower HousingService To Adjust Brake See FigTo Replace Mower Blade Drive Belt See Fig Adjustm NTS To Adjust Motion Control Lever See FigTransmission REMOVAL/REPLACEMENT To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak BatteryFront Wheel TOE-IN/CAMBER See FigTo Remove Hood and Grill Assembly To Replace Headlight BulbInterlocks and Relays To Replace FuseTo Adjust Throttle Control Cable To Adjust Carburetor See FigSee Storage OtherTroubleshooting Points Problem Cause CorrectionProblem Cause Service Notes JlJ Tractor - Model NumberTractor --MODEL Number ElectricalTractor -- Model Number KEY Part NO. NO.DESCRIPTIONChassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly Steering Wheel Axle Assembly, Front Spindle Assembly, LH Engine 4218122439X Seat Assembly UNCDecals Wheels & TiresMower Lift 161718BIkZinc 73800800 Nut LockW/Wsh 13 Unc 139868 Arm Suspension Mower Deck Inch = Tractor - Model Number Hydro Gear Transaxle Model Number 142930 D,,RUD,,I Kohler ENGINE- Model Number MV18.OS, Type Number PS58560Kohler Engine Model Number MV18.OS, Type Number PS58560 AIR Intake KEY Part DescriptionCarbu Retor J Crankcase Dipstick Screw 1/4-20 x 5/8 Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation If YOU Need Repair Service or Parts Model noPage Safety Rules Maintenance Agreement Contents Accessories Attachments Contents Assem BLY Assembly Check Tire Pressure Checklist Operation HOW to USE Your Tractor Before Starting the Engine Fii AcAuieverenIioiiii Operation SE.V.C Customer Responsibilities Engine Cleaning Service and Adjustments Adjustments Service Adjustm NTS Service and Adjustments Adjustments Sc. w Storage Troubleshooting Points Problem Cause Service Notes JlJ Repair Parts Tractor -- Model Number Tractor - Model Number KEY Part Description Drive Repair Parts Steering Assembly Tractor -- Model Number Spark Arrester 122439X Tractor -- Model Number Tractor --MODEL Number Tractor - Model Number BIkZinc 73800800 Nut LockW/Wsh 13 Unc 139868 Arm Suspension Tractor --MODEL Number Tractor - Model Number Tractor - Model Number Hydro Gear Transaxle Model Number 142930 D,,RUD,,I Tractor --MODEL Number Tractor --MODEL Number Tractor - Model Number Tractor -- Model Number Screw 1/4-20 x 5/8 Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation HP Twin Cylinder Electric Start

917.25271 specifications

The Sears 917.25271 is a robust and versatile garden tractor that has earned its place in the hearts of gardening enthusiasts and lawn care professionals alike. With its impressive blend of features, technologies, and characteristics, this tractor is designed to meet various landscaping and maintenance needs while ensuring user satisfaction and operational efficiency.

One of the standout features of the Sears 917.25271 is its powerful engine. Equipped with a strong and reliable gas-powered engine, the tractor delivers ample horsepower to tackle even the toughest mowing jobs. This ensures that users can efficiently manage their lawns, regardless of terrain type or grass thickness. The smooth operation of the engine is complemented by an easy-to-use ignition system, allowing users to start the tractor with minimal effort.

The design of the 917.25271 prioritizes comfort and usability. Its ergonomic seat provides ample cushioning, reducing fatigue during longer mowing sessions. The adjustable seat allows users of different heights to find their optimal driving position, enhancing overall comfort and control. Moreover, the tractor features a user-friendly control panel, enabling easy access to all essential functions such as speed adjustments, blade engagement, and throttle control.

Another notable technology incorporated into the Sears 917.25271 is its advanced cutting system. The tractor includes a durable mower deck that ensures a clean and even cut, contributing to a well-maintained lawn appearance. The ability to easily adjust the cutting height makes it adaptable to different grass types and seasonal variations, ensuring efficient lawn care throughout the year.

Durability is a key characteristic of the 917.25271. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. The reinforced chassis and strong tires provide excellent traction and stability on varied terrain, making it suitable for larger lawns and uneven landscapes.

Additionally, the Sears 917.25271 offers versatility through its attachment options. Users can enhance the tractor's capabilities with various accessories such as snow plows, baggers, and tillers. This adaptability allows it to serve multiple functions, making it a valuable tool not just for mowing, but for year-round landscaping projects.

In conclusion, the Sears 917.25271 stands out for its powerful engine, user-friendly design, advanced cutting technology, and unmatched durability. These attributes make it an essential choice for anyone looking to simplify their lawn care routines and achieve professional results.
Top Page Image Contents