Sears 917.25271 Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts

Page 9

ii

ASSEMBLY

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" on page 3 of this manual.

 

 

i i

_._,_:_ .-'" "

TERMINAL

:

_<_

BATTERY

:

_f

BOLTS

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL

BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments

section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual.

INSTALL BATTERY (See Figs. 4 and 5)

i

CAUTION: Do not short battery termi-

nals. Before installing battery, remove metal bracelets, wristwatch bands,

rings, etc.

Positive terminal must be connected first to prevent sparking from acciden- tal grounding.

•Lift hood to raised position.

•Be sure battery drain tube has not come loose and is securely attached to drain in battery tray.

•Lower battery into battery tray with terminals to front of tractor•

•• Position terminal guard over battery and install battery bolts through guard mounting holes and into threaded fasteners on support plate.

•Tighten battery bolts securely, but do not over tighten.

•Open terminal access doors.

•First connect RED battery cable to positive (+) battery terminal with hex bolt, flat washer, lock washer and hex nut as shown. Tighten securely.

•Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt, flat washer, lock washer and hex nut. Tighten securely.

•Close terminal access doors.

Use terminal access doors for:

•Inspection for secure connections (to tighten hard- ware).

•Inspection for corrosion.

•Testing battery.

•Jumping (if required).

•Periodic charging.

FASTENER

 

 

 

 

_'_"'" _..._

 

BATTERY

THREADED _

DRAIN TUBE

TRAY

 

 

 

FIG. 4

 

 

 

LOCK

FLAT WASHER

 

WASHER

 

 

HEX NUT

 

 

HEX BOLT

 

POSITIVE

:_!i

(RED)

;. -..

CABLE

NEGATIVE

(BLACK)

CABLE

FIG. 5

ASSEMBLE GAUGE WHEELS TO MOWER

DECK (See Fig. 6)

Assemble gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See"TO AD- JUST MOWER CUTTING HEIGHT" in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the

ground• Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 Iocknut and tighten securely.

•Repeat for opposite side installing gauge wheel tn same adjustment hole.

GAUGE WHEEL

MOUNTING

BRACKET

318-16

FIG. 6

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Safe Operation Practices for Ride-On Mowers Safety RulesMaintenance Agreement Product SpecificationsLimited 90 DAY Warranty on Battery Contents Performance Engine MaintenanceContents To Remove Tractor from Carton Tools Required for AssemblyBefore Rolling Tractor OFF Skid Unpack CartonHOW to SET UP Your Tractor AssemblyPrepare Battery See Figs a and 2B Install Seat See FigCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemInstall Mulcher Plate ChecklistSee Figs a & 7B To Convert to Bagging or DischargingKnow Your Tractor OperationTo Move Forward and Backward HOW to USE Your TractorTo Operate Mower See Fig Before Starting the EngineTo Operate on Hills Check Engine OIL Level See FigADD Gasoline To Start Engine See FigPurge Transmission Mulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartLub.caoncha Before Each USETractor Customer ResponsibilitiesBrake Operation TiresTransaxle Cooling EngineTransaxle Pump Fluid AIR Filter See FigEngine OIL Filter CleaningMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing AdjustmentsService To Adjust Brake See FigTo Replace Mower Blade Drive Belt See Fig To Adjust Motion Control Lever See Fig Adjustm NTSTransmission REMOVAL/REPLACEMENT To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER See FigTo Replace Headlight Bulb To Remove Hood and Grill AssemblyInterlocks and Relays To Replace FuseTo Adjust Throttle Control Cable To Adjust Carburetor See FigSee Other StorageProblem Cause Correction Troubleshooting PointsProblem Cause Service Notes Tractor - Model Number JlJElectrical Tractor --MODEL NumberKEY Part NO. NO.DESCRIPTION Tractor -- Model NumberChassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly Steering Wheel Axle Assembly, Front Spindle Assembly, LH 4218 Engine122439X UNC Seat AssemblyWheels & Tires Decals161718 Mower LiftBIkZinc 73800800 Nut LockW/Wsh 13 Unc 139868 Arm Suspension Mower Deck Inch = Tractor - Model Number Hydro Gear Transaxle Model Number 142930 Kohler ENGINE- Model Number MV18.OS, Type Number PS58560 D,,RUD,,IAIR Intake KEY Part Description Kohler Engine Model Number MV18.OS, Type Number PS58560Carbu Retor J Crankcase Dipstick Screw 1/4-20 x 5/8 Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Model no If YOU Need Repair Service or PartsPage Safety Rules Maintenance Agreement Contents Accessories Attachments Contents Assem BLY Assembly Check Tire Pressure Checklist Operation HOW to USE Your Tractor Before Starting the Engine Fii AcAuieverenIioiiii Operation SE.V.C Customer Responsibilities Engine Cleaning Service and Adjustments Adjustments Service Adjustm NTS Service and Adjustments Adjustments Sc. w Storage Troubleshooting Points Problem Cause Service Notes JlJ Repair Parts Tractor -- Model Number Tractor - Model Number KEY Part Description Drive Repair Parts Steering Assembly Tractor -- Model Number Spark Arrester 122439X Tractor -- Model Number Tractor --MODEL Number Tractor - Model Number BIkZinc 73800800 Nut LockW/Wsh 13 Unc 139868 Arm Suspension Tractor --MODEL Number Tractor - Model Number Tractor - Model Number Hydro Gear Transaxle Model Number 142930 D,,RUD,,I Tractor --MODEL Number Tractor --MODEL Number Tractor - Model Number Tractor -- Model Number Screw 1/4-20 x 5/8 Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation HP Twin Cylinder Electric Start

917.25271 specifications

The Sears 917.25271 is a robust and versatile garden tractor that has earned its place in the hearts of gardening enthusiasts and lawn care professionals alike. With its impressive blend of features, technologies, and characteristics, this tractor is designed to meet various landscaping and maintenance needs while ensuring user satisfaction and operational efficiency.

One of the standout features of the Sears 917.25271 is its powerful engine. Equipped with a strong and reliable gas-powered engine, the tractor delivers ample horsepower to tackle even the toughest mowing jobs. This ensures that users can efficiently manage their lawns, regardless of terrain type or grass thickness. The smooth operation of the engine is complemented by an easy-to-use ignition system, allowing users to start the tractor with minimal effort.

The design of the 917.25271 prioritizes comfort and usability. Its ergonomic seat provides ample cushioning, reducing fatigue during longer mowing sessions. The adjustable seat allows users of different heights to find their optimal driving position, enhancing overall comfort and control. Moreover, the tractor features a user-friendly control panel, enabling easy access to all essential functions such as speed adjustments, blade engagement, and throttle control.

Another notable technology incorporated into the Sears 917.25271 is its advanced cutting system. The tractor includes a durable mower deck that ensures a clean and even cut, contributing to a well-maintained lawn appearance. The ability to easily adjust the cutting height makes it adaptable to different grass types and seasonal variations, ensuring efficient lawn care throughout the year.

Durability is a key characteristic of the 917.25271. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. The reinforced chassis and strong tires provide excellent traction and stability on varied terrain, making it suitable for larger lawns and uneven landscapes.

Additionally, the Sears 917.25271 offers versatility through its attachment options. Users can enhance the tractor's capabilities with various accessories such as snow plows, baggers, and tillers. This adaptability allows it to serve multiple functions, making it a valuable tool not just for mowing, but for year-round landscaping projects.

In conclusion, the Sears 917.25271 stands out for its powerful engine, user-friendly design, advanced cutting technology, and unmatched durability. These attributes make it an essential choice for anyone looking to simplify their lawn care routines and achieve professional results.
Top Page Image Contents