Sears 917.25271 owner manual Before Starting the Engine

Page 73

TO OPERATE MOWER (See Fig. 10)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

oSelect desired height of cut.

Lower mower with attachment lift control.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

i lUiiiiiii innllm

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the dis- charge guard in place.

I I IIII IIIIIIIII II III

ATTACHMENT CLUTCH SWITCH

ATTACHMENT

PULL OUT TO "ENGAGE"

LIFT LEVER

 

HIGH POSITION

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 8 and 11)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attach- ment lift control.

•Pull freewheel control knob out and hold in position by inserting retainer spring into forward hole of control rod.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

.,;1;;;;" DISCHARGE

GUARD

PUSHINTO _\

DISENGAGE

 

 

FIG.

10

TO OPERATE ON HILLS

I

i

i

i

 

 

 

• I

 

CAUTION: Do

not drive up or down

i

 

hills with slopes greater than 15 ° and

 

do not drive across any slope.

 

 

IIII

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake

pedal quickly to brake position and engage parking brake.

•Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES

NOT RETURN TO NEUTRAL (N) POSITION WHEN THE

CLUTCH/BRAKE PEDAL IS DEPRESSED.

•To restart movement, slowly release parking brake and clutch/brake pedal.

FIG. 11

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL (See Fig. 17)

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and push it all the way down into the tube, wait for a few seconds, remove and read oil level. If

necessary, add oil until "FULL" mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See "OIL VISCOSITY CHART' in the Customer Responsibilities section of this manual).

•To change engine oil, see the Customer Responsibili- ties section in this manual.

13

Page 72 Page 74
Image 73
Page 72 Page 74
Contents Page Safe Operation Practices for Ride-On Mowers Safety RulesProduct Specifications Maintenance AgreementLimited 90 DAY Warranty on Battery Contents Performance Engine MaintenanceContents To Remove Tractor from Carton Tools Required for AssemblyBefore Rolling Tractor OFF Skid Unpack CartonHOW to SET UP Your Tractor AssemblyPrepare Battery See Figs a and 2B Install Seat See FigCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemInstall Mulcher Plate ChecklistSee Figs a & 7B To Convert to Bagging or DischargingKnow Your Tractor OperationTo Move Forward and Backward HOW to USE Your TractorTo Operate Mower See Fig Before Starting the EngineTo Operate on Hills Check Engine OIL Level See FigTo Start Engine See Fig ADD GasolinePurge Transmission Mulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartLub.caoncha Before Each USETractor Customer ResponsibilitiesBrake Operation TiresTransaxle Cooling EngineTransaxle Pump Fluid AIR Filter See FigEngine OIL Filter CleaningMuffler Spark PlugsTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing AdjustmentsTo Adjust Brake See Fig ServiceTo Replace Mower Blade Drive Belt See Fig To Adjust Motion Control Lever See Fig Adjustm NTSTransmission REMOVAL/REPLACEMENT To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER See FigTo Replace Headlight Bulb To Remove Hood and Grill AssemblyInterlocks and Relays To Replace FuseTo Adjust Carburetor See Fig To Adjust Throttle Control CableSee Other StorageProblem Cause Correction Troubleshooting PointsProblem Cause Service Notes Tractor - Model Number JlJElectrical Tractor --MODEL NumberKEY Part NO. NO.DESCRIPTION Tractor -- Model NumberChassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly Steering Wheel Axle Assembly, Front Spindle Assembly, LH 4218 Engine122439X UNC Seat AssemblyWheels & Tires Decals161718 Mower LiftBIkZinc 73800800 Nut LockW/Wsh 13 Unc 139868 Arm Suspension Mower Deck Inch = Tractor - Model Number Hydro Gear Transaxle Model Number 142930 Kohler ENGINE- Model Number MV18.OS, Type Number PS58560 D,,RUD,,IAIR Intake KEY Part Description Kohler Engine Model Number MV18.OS, Type Number PS58560Carbu Retor J Crankcase Dipstick Screw 1/4-20 x 5/8 Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Model no If YOU Need Repair Service or PartsPage Safety Rules Maintenance Agreement Contents Accessories Attachments Contents Assem BLY Assembly Check Tire Pressure Checklist Operation HOW to USE Your Tractor Before Starting the Engine Fii AcAuieverenIioiiii Operation SE.V.C Customer Responsibilities Engine Cleaning Service and Adjustments Adjustments Service Adjustm NTS Service and Adjustments Adjustments Sc. w Storage Troubleshooting Points Problem Cause Service Notes JlJ Repair Parts Tractor -- Model Number Tractor - Model Number KEY Part Description Drive Repair Parts Steering Assembly Tractor -- Model Number Spark Arrester 122439X Tractor -- Model Number Tractor --MODEL Number Tractor - Model Number BIkZinc 73800800 Nut LockW/Wsh 13 Unc 139868 Arm Suspension Tractor --MODEL Number Tractor - Model Number Tractor - Model Number Hydro Gear Transaxle Model Number 142930 D,,RUD,,I Tractor --MODEL Number Tractor --MODEL Number Tractor - Model Number Tractor -- Model Number Screw 1/4-20 x 5/8 Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation HP Twin Cylinder Electric Start

917.25271 specifications

The Sears 917.25271 is a robust and versatile garden tractor that has earned its place in the hearts of gardening enthusiasts and lawn care professionals alike. With its impressive blend of features, technologies, and characteristics, this tractor is designed to meet various landscaping and maintenance needs while ensuring user satisfaction and operational efficiency.

One of the standout features of the Sears 917.25271 is its powerful engine. Equipped with a strong and reliable gas-powered engine, the tractor delivers ample horsepower to tackle even the toughest mowing jobs. This ensures that users can efficiently manage their lawns, regardless of terrain type or grass thickness. The smooth operation of the engine is complemented by an easy-to-use ignition system, allowing users to start the tractor with minimal effort.

The design of the 917.25271 prioritizes comfort and usability. Its ergonomic seat provides ample cushioning, reducing fatigue during longer mowing sessions. The adjustable seat allows users of different heights to find their optimal driving position, enhancing overall comfort and control. Moreover, the tractor features a user-friendly control panel, enabling easy access to all essential functions such as speed adjustments, blade engagement, and throttle control.

Another notable technology incorporated into the Sears 917.25271 is its advanced cutting system. The tractor includes a durable mower deck that ensures a clean and even cut, contributing to a well-maintained lawn appearance. The ability to easily adjust the cutting height makes it adaptable to different grass types and seasonal variations, ensuring efficient lawn care throughout the year.

Durability is a key characteristic of the 917.25271. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. The reinforced chassis and strong tires provide excellent traction and stability on varied terrain, making it suitable for larger lawns and uneven landscapes.

Additionally, the Sears 917.25271 offers versatility through its attachment options. Users can enhance the tractor's capabilities with various accessories such as snow plows, baggers, and tillers. This adaptability allows it to serve multiple functions, making it a valuable tool not just for mowing, but for year-round landscaping projects.

In conclusion, the Sears 917.25271 stands out for its powerful engine, user-friendly design, advanced cutting technology, and unmatched durability. These attributes make it an essential choice for anyone looking to simplify their lawn care routines and achieve professional results.
Top Page Image Contents