McCulloch 115249726 Cultivator Safety, Hedge Trimmer Safety, Pole Pruner Safety, Attached

Page 14

through discharge opening, damaging unit, property, or causing serious injury to bystanders or operator.

SNever place objects inside the blower tubes, vacuum tubes or blower outlet. Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

SNever run unit without the proper equipment

attached.

SCheck air intake opening frequently always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free of debris which can accumulate

and restrict proper air flow.

SNever place any object in air intake opening as this could restrict proper air flow and cause damage to the unit.

SNever use for spreading chemicals, fertilizers, or other substances which may contain toxic materials.

STo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.

CULTIVATOR SAFETY

WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the engine and disconnect the spark plug before unclogging tines or making repairs.

WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc.

S Avoid heavy contact with solid objects that might stop the tines. If heavy contact occurs, stop the engine and inspect the unit for damage.

SNever operate the cultivator without the tine

cover in place and properly secured.

SKeep the tines and guard clear of debris.

SAfter striking a foreign object, stop the engine,

disconnect the spark plug and inspect the cultivator for damage. Repair before restarting.

SDisconnect attachment from the drive engine before cleaning the tines with a hose and water to remove any build--up. Oil the tines to prevent rust.

S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use.

S Do not run unit at high speed unless cultivating.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE -- Blade

moves momentarily after the trigger is re- leased. Do not attempt to clear away cut ma- terial when the blade is in motion. Make sure the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts replaced by your authorized service dealer.

SAlways keep unit in front of your body. Keep all parts of your body away from the cutting

blade.

SKeep the cutting blade and air vents clear of debris.

POLE PRUNER SAFETY

WARNING: The reciprocating blade/ rotating chain can cause severe injury. In- spect the unit before use. Do not operate unit with a bent, cracked or dull blade or dull chain. Keep away from the blade/chain.

WARNING: The reciprocating blade/ rotating chain is sharp. Do not touch. To pre- vent serious injury, always stop engine and ensure blade/chain has stopped moving, dis- connect spark plug, and wear gloves when changing or handling the blade or chain.

WARNING: A coasting blade/rotating chain can cause injury while it continues to move after the engine is stopped. Maintain proper control of the unit until the blade/chain has completely stopped moving. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade or chain when it is moving.

14

Image 14
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSBetriebsanweisung Table of Contents Identification What is WHAT?Identification of Symbols Safety RulesHazard Zone Operator SafetyUnit / Maintenance Safety Are doing use common senseAssembly Attaching the Handle Installing Trimmer AttachmentAssembly of Shoulder Strap To Relocate Shoulder Strap ClampAttaching the Plastic Shield and Trimmer Head Configuring Your UnitAssembly Information Trimmer Head Attaching the Metal Shield Assembly Information Weed BladeInstallation of the Metal Blade Wrench Nut Gearbox Dust cup Aligned holes Retaining washerFueling Engine OperationAttaching the Transport Guard GuardInstalling Optional ATTACH- Ments HOW to Stop Your UnitHOW to Start Your Unit Starting a Flooded EngineTrimmer Line Advance Operating PositionOperating Instructions for USE with Trimmer Head Cutting MethodsCm above ground Operating Instructions for USE with Weed BladeTrimming MowingBLOWER/VACUUM Safety Additional Safety RulesEdger Safety Pole Pruner Safety Cultivator SafetyHedge Trimmer Safety AttachedCm in diameter Snow Thrower SafetySpeed when not pruning AnotherMaintenance Service and AdjustmentsCover Spool Remove any remaining line Engine will not idle when the throttle is re- leased Blade ReplacementCarburetor Adjustment StorageEngine Troubleshooting Table Cause RemedySeasonal Storage Other09--1--31 Declaration of ConformityEC Declaration of Conformity Only applies to Europe Technical Data Noise Levels Octave Band Analysis 100-10000hz 1/3 Octave

115249726 specifications

The McCulloch 115249726 is a robust chainsaw designed to meet the needs of both DIY enthusiasts and professional users. Known for its powerful performance and user-friendly features, this chainsaw has become a popular choice for those looking to tackle various cutting tasks, from tree trimming to firewood preparation.

One of the standout features of the McCulloch 115249726 is its reliable engine. Equipped with a strong, high-performance two-stroke engine, it delivers ample power for demanding cutting jobs. This engine provides a perfect balance between efficiency and performance, ensuring that users can rely on the chainsaw to handle tougher materials without straining the machine. The chainsaw operates at optimal speeds, allowing for smooth and quick cuts.

Another essential characteristic of the McCulloch 115249726 is its lightweight design. Weighing in at a manageable weight, this chainsaw is designed for ease of handling, reducing user fatigue during extended use. Its ergonomic handle ensures a comfortable grip, enhancing user control and stability. The chain brake feature adds an extra layer of safety by immediately stopping the chain in the event of kickback, making this chainsaw ideal for both experienced and novice users.

The McCulloch 115249726 also boasts advanced technology to enhance performance and longevity. One key technology is its automatic oiler system, which keeps the chain lubricated during use, minimizing wear and tear. This system not only extends the lifespan of the chain and bar but also ensures optimal cutting efficiency. The chainsaw is designed for easy maintenance, which includes tool-less chain tensioning, allowing users to quickly adjust the chain for the best cutting results.

Furthermore, the McCulloch 115249726 is equipped with an easy-start system that reduces the effort required to start the engine, making it more accessible for users of all skill levels. Its durable construction ensures that it can withstand the rigors of tough outdoor conditions, making it a reliable companion for all your cutting needs.

In summary, the McCulloch 115249726 combines power, efficiency, and safety features to deliver a superior chainsaw experience. With its robust engine, user-friendly design, and advanced technologies, it stands out as an excellent choice for anyone seeking a reliable tool for their cutting projects. Whether for occasional use or professional applications, this chainsaw offers the performance and features required to tackle any job effectively.