McCulloch 115249726 instruction manual Configuring Your Unit, Assembly Information Trimmer Head

Page 7

Upper shoulder strap clamp

Lower shoulder

 

strap clamp

Screws

 

4.Insert two screws into the screw holes.

5.Secure shoulder strap clamp by tighten- ing screws with a hex wrench.

HARNESS

ADJUSTMENT

FOR BALANCE

15 cm

 

 

 

below

 

 

10 -- 30 cm

waist

 

 

above

 

 

76 cm

ground

 

 

 

 

76 cm

CONFIGURING YOUR UNIT

You can configure your unit using a cutting head for grass and light weeds, or a weed blade for cutting grass, weeds, and brush up to 1 cm in diameter. To assemble your unit, go to the sec- tion for the desired configuration and follow the instructions.

ASSEMBLY INFORMATION - TRIMMER HEAD

TRIMMER

HEAD

NOTE: Remove the blade and metal shield be- fore attaching the plastic shield and trimmer head. To remove blade, align hole in the dust cup with the hole in the side of the gearbox by rotating the blade. Insert a small screwdriver into aligned holes. This will keep the shaft from turning while loosening the blade nut. Remove blade nut by turning clockwise. Remove the screwdriver. Remove both washers and blade. To remove metal shield, loosen and remove the four mounting screws. See ATTACHING THE METAL SHIELD and INSTALLATION OF THE METAL BLADE for illustrations. Be sure to store all parts and instructions for future use.

ATTACHING THE PLASTIC SHIELD AND TRIMMER HEAD

WARNING: The shield must be prop- erly installed. The shield provides partial protection to the operator and others from the risk of thrown objects, and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on un- derside of shield) is sharp and can cut you.

1.Remove nut from shield.

2.Insert bracket into slot on shield.

3.Pivot shield until bolt passes through hole in bracket.

Bracket

Shield

Slot

4.Reinstall nut and tighten securely with wrench (provided).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Betriebsanweisung Manuel D’INSTRUCTIONSManual DE Instrucciones Identification What is WHAT? Table of ContentsSafety Rules Identification of SymbolsAre doing use common sense Operator SafetyUnit / Maintenance Safety Hazard ZoneAssembly To Relocate Shoulder Strap Clamp Installing Trimmer AttachmentAssembly of Shoulder Strap Attaching the HandleAssembly Information Trimmer Head Configuring Your UnitAttaching the Plastic Shield and Trimmer Head Wrench Nut Gearbox Dust cup Aligned holes Retaining washer Assembly Information Weed BladeInstallation of the Metal Blade Attaching the Metal ShieldGuard OperationAttaching the Transport Guard Fueling EngineStarting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Installing Optional ATTACH- MentsCutting Methods Operating PositionOperating Instructions for USE with Trimmer Head Trimmer Line AdvanceMowing Operating Instructions for USE with Weed BladeTrimming Cm above groundEdger Safety Additional Safety RulesBLOWER/VACUUM Safety Attached Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetyAnother Snow Thrower SafetySpeed when not pruning Cm in diameterService and Adjustments MaintenanceCover Spool Remove any remaining line Storage Blade ReplacementCarburetor Adjustment Engine will not idle when the throttle is re- leasedOther Troubleshooting Table Cause RemedySeasonal Storage EngineEC Declaration of Conformity Only applies to Europe Declaration of Conformity09--1--31 Noise Levels Octave Band Analysis 100-10000hz 1/3 Octave Technical Data

115249726 specifications

The McCulloch 115249726 is a robust chainsaw designed to meet the needs of both DIY enthusiasts and professional users. Known for its powerful performance and user-friendly features, this chainsaw has become a popular choice for those looking to tackle various cutting tasks, from tree trimming to firewood preparation.

One of the standout features of the McCulloch 115249726 is its reliable engine. Equipped with a strong, high-performance two-stroke engine, it delivers ample power for demanding cutting jobs. This engine provides a perfect balance between efficiency and performance, ensuring that users can rely on the chainsaw to handle tougher materials without straining the machine. The chainsaw operates at optimal speeds, allowing for smooth and quick cuts.

Another essential characteristic of the McCulloch 115249726 is its lightweight design. Weighing in at a manageable weight, this chainsaw is designed for ease of handling, reducing user fatigue during extended use. Its ergonomic handle ensures a comfortable grip, enhancing user control and stability. The chain brake feature adds an extra layer of safety by immediately stopping the chain in the event of kickback, making this chainsaw ideal for both experienced and novice users.

The McCulloch 115249726 also boasts advanced technology to enhance performance and longevity. One key technology is its automatic oiler system, which keeps the chain lubricated during use, minimizing wear and tear. This system not only extends the lifespan of the chain and bar but also ensures optimal cutting efficiency. The chainsaw is designed for easy maintenance, which includes tool-less chain tensioning, allowing users to quickly adjust the chain for the best cutting results.

Furthermore, the McCulloch 115249726 is equipped with an easy-start system that reduces the effort required to start the engine, making it more accessible for users of all skill levels. Its durable construction ensures that it can withstand the rigors of tough outdoor conditions, making it a reliable companion for all your cutting needs.

In summary, the McCulloch 115249726 combines power, efficiency, and safety features to deliver a superior chainsaw experience. With its robust engine, user-friendly design, and advanced technologies, it stands out as an excellent choice for anyone seeking a reliable tool for their cutting projects. Whether for occasional use or professional applications, this chainsaw offers the performance and features required to tackle any job effectively.
Top Page Image Contents