McCulloch 115249726 instruction manual Operator Safety, Unit / Maintenance Safety, Hazard Zone

Page 4

WARNING: Hazard zone for thrown objects. Blade/Trimmer line can throw objects violently. Others can be blinded or injured. Keep people and animals 15 meters away.

Hazard Zone

WARNING: Do not use trimmer head as a fastening device for the blade.

WARNING: The blade continues to spin after the throttle is released or, engine is turned off. The coasting blade can throw objects or seriously cut if accidentally touched. Stop the blade by contacting the right hand side of the coasting blade with material already cut.

Stop coasting blade by contact with cut material.

OPERATOR SAFETY

S Dress properly. Always wear safety glasses or similar eye protection when op- erating, or performing maintenance, on your unit (safety glasses are available). Eye protection should be marked Z87.

S Always wear a helmet if the trees to be cleared are taller than 2 meters.

SAlways wear face or dust mask if operation is dusty.

S Always wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards is recommended.

S Always wear foot protection. Do not go barefoot or wear sandals. Stay clear of blade/spinning line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts.

SBeing fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

SStay alert. Do not operate this unit when you are tired, ill, upset or under the influence of al- cohol, drugs, or medication. Watch what you

are doing; use common sense.

SWear hearing protection. Long or continu- ous exposure to high noise levels may

cause permanent hearing impairment.

SNever start or run inside a closed room or

building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

SAlways use the handlebar and a properly adjusted shoulder strap with a blade (see ASSEMBLY).

UNIT / MAINTENANCE SAFETY

WARNING: Stop unit and disconnect the spark plug before performing mainte- nance (except carburetor adjustments).

SThrow away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace trimmer head parts that are

cracked, chipped, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep blade sharp. Keep cut- ting line at the proper length.

S Use only 2,4 mm diameter McCulloch brand replacement line. Never use wire, rope, string, etc.

SInstall required shield properly before using the unit. Use the metal shield for all metal

blade use. Use the plastic shield for all line trimmer use.

SUse only specified blade or trimmer head; make sure it is properly installed and se-

curely fastened.

SNever start engine with clutch shroud re- moved. The clutch can fly off and cause se- rious injury.

SBe sure blade or trimmer head stops turning

when engine idles.

SMake carburetor adjustments with the lower end supported to prevent blade or trimmer line from contacting any object. Hold unit by hand; do not use the shoulder strap for support.

SKeep others away when making carbure- tor adjustments.

SUse only recommended McCulloch accesso- ries and replacement parts.

SHave all maintenance and service not ex- plained in this manual performed by your au- thorized service dealer.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Betriebsanweisung Manuel D’INSTRUCTIONSManual DE Instrucciones Table of Contents Identification What is WHAT?Identification of Symbols Safety RulesOperator Safety Unit / Maintenance SafetyHazard Zone Are doing use common senseAssembly Installing Trimmer Attachment Assembly of Shoulder StrapAttaching the Handle To Relocate Shoulder Strap ClampAssembly Information Trimmer Head Configuring Your UnitAttaching the Plastic Shield and Trimmer Head Assembly Information Weed Blade Installation of the Metal BladeAttaching the Metal Shield Wrench Nut Gearbox Dust cup Aligned holes Retaining washerOperation Attaching the Transport GuardFueling Engine GuardHOW to Stop Your Unit HOW to Start Your UnitInstalling Optional ATTACH- Ments Starting a Flooded EngineOperating Position Operating Instructions for USE with Trimmer HeadTrimmer Line Advance Cutting MethodsOperating Instructions for USE with Weed Blade TrimmingCm above ground MowingEdger Safety Additional Safety RulesBLOWER/VACUUM Safety Cultivator Safety Hedge Trimmer SafetyPole Pruner Safety AttachedSnow Thrower Safety Speed when not pruningCm in diameter AnotherMaintenance Service and AdjustmentsCover Spool Remove any remaining line Blade Replacement Carburetor AdjustmentEngine will not idle when the throttle is re- leased StorageTroubleshooting Table Cause Remedy Seasonal StorageEngine OtherEC Declaration of Conformity Only applies to Europe Declaration of Conformity09--1--31 Technical Data Noise Levels Octave Band Analysis 100-10000hz 1/3 Octave

115249726 specifications

The McCulloch 115249726 is a robust chainsaw designed to meet the needs of both DIY enthusiasts and professional users. Known for its powerful performance and user-friendly features, this chainsaw has become a popular choice for those looking to tackle various cutting tasks, from tree trimming to firewood preparation.

One of the standout features of the McCulloch 115249726 is its reliable engine. Equipped with a strong, high-performance two-stroke engine, it delivers ample power for demanding cutting jobs. This engine provides a perfect balance between efficiency and performance, ensuring that users can rely on the chainsaw to handle tougher materials without straining the machine. The chainsaw operates at optimal speeds, allowing for smooth and quick cuts.

Another essential characteristic of the McCulloch 115249726 is its lightweight design. Weighing in at a manageable weight, this chainsaw is designed for ease of handling, reducing user fatigue during extended use. Its ergonomic handle ensures a comfortable grip, enhancing user control and stability. The chain brake feature adds an extra layer of safety by immediately stopping the chain in the event of kickback, making this chainsaw ideal for both experienced and novice users.

The McCulloch 115249726 also boasts advanced technology to enhance performance and longevity. One key technology is its automatic oiler system, which keeps the chain lubricated during use, minimizing wear and tear. This system not only extends the lifespan of the chain and bar but also ensures optimal cutting efficiency. The chainsaw is designed for easy maintenance, which includes tool-less chain tensioning, allowing users to quickly adjust the chain for the best cutting results.

Furthermore, the McCulloch 115249726 is equipped with an easy-start system that reduces the effort required to start the engine, making it more accessible for users of all skill levels. Its durable construction ensures that it can withstand the rigors of tough outdoor conditions, making it a reliable companion for all your cutting needs.

In summary, the McCulloch 115249726 combines power, efficiency, and safety features to deliver a superior chainsaw experience. With its robust engine, user-friendly design, and advanced technologies, it stands out as an excellent choice for anyone seeking a reliable tool for their cutting projects. Whether for occasional use or professional applications, this chainsaw offers the performance and features required to tackle any job effectively.
Top Page Image Contents