Input Connections

Using good quality co-axial audio leads, connect the left and right outputs from your pre-amplifier or other controlled source to either A or B RCA inputs.

IEC mains power inlet

LOUDSPEAKER CONNECTIONS

CONNECTIONS

All input, output and power connections should be made with the mains power switched OFF.

OUTPUTOUTPUT

These RCA sockets have “line level” audio “loop” output routed from either A or B input by the selector switch on the front panel.

They are for onward connection to another amplifier if required.

(See page 6 under BI-AMPLIFICATION).

The X-P200 is a stereo amplifier, but can instead be used in “bridge” mode to obtain a single (mono) output with higher power.

However, do not attempt both speaker connection methods at the same time.

Conventional stereo use :

Connect each of your loudspeakers to the pair of terminals on the back panel marked LEFT and RIGHT SPEAKER OUTPUT. The wiring must be “in phase”, namely, the red (+) and black (-) terminals must be connected to the left and right speakers the same way round.

Bridge mode :

Connect a single (mono) loudspeaker between LEFT and RIGHT red (+) terminals only

Note that in this mode, the right-hand channel red terminal becomes negative (-) for phasing purposes. This is important for maintaining correct phase with any other amplifier being used in your audio system.

Important :

*The load impedance must not be less than 4 ohms.

*Do not make any earth connection to the speaker terminals.

Page 4 of 7

X-P200 Power Amplifier

Page 5 of 7

X-P200 specifications

The Musical Fidelity X-P200 integrated amplifier is a prominent audio component that has gained recognition for its high-quality sound reproduction and refined design. Emphasizing a balance of power and precision, it seamlessly integrates into any audiophile's home audio system.

One of the key features of the X-P200 is its high output power, reaching an impressive 100 watts per channel into 8 ohms. This power allows it to drive a wide range of speakers, providing robust performance and dynamic sound across various musical genres. The amplifier’s dual mono architecture ensures that each channel operates independently, allowing for enhanced stereo separation and improved soundstage.

The X-P200 employs sophisticated Class A/B amplification technology, which combines the advantages of both Class A and Class B designs. This results in low harmonic distortion and superior linearity, delivering a warm and detailed musical experience. Additionally, the amp boasts a high damping factor, which facilitates excellent control of the connected speakers, ultimately producing tight and articulate bass response.

In terms of connectivity, the X-P200 is equipped with a variety of inputs, including multiple line-level RCA inputs, allowing users to connect various sources such as CD players, tuners, and even digital audio players. The amplifier also features a headphone output, making it a versatile option for personal listening, while the built-in mute function adds convenience during use.

The construction of the X-P200 reflects a commitment to quality. Its robust chassis design minimizes resonance and external interference, ensuring that the components operate optimally. The amplifier's front panel features a sleek, minimalist aesthetic with simple controls that enhance usability without overwhelming the listener.

In summary, the Musical Fidelity X-P200 stands out as a powerful, versatile integrated amplifier that combines advanced amplification technologies with thoughtful design. It is an excellent choice for both casual listeners and serious audiophiles, providing a high-fidelity audio experience that truly captures the essence of the music. Whether used in a dedicated listening room or as part of a more extensive home audio setup, the X-P200 delivers performance and reliability, making it a worthwhile investment for any music enthusiast.