Troy-Bilt 52057, 52058 owner manual Cleaning the Engine Debris Guard, Lubrication, Compact Storage

Page 16

Section 5: Maintenance

WARNING

Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models.

Failure to follow these instructions can result in serious personal injury or property damage.

TRIMMER/MOWER CLEANING AND DEBRIS REMOVAL

Thorough and regular cleaning of de- bris from around the engine and on the machine is required for maximum engine efficiency and good overall performance. Inspect and clean the following areas regularly, making sure the engine is stopped, and cool, before proceeding:

•Brush and wipe off all engine sur- faces, especially before checking oil or adding fuel. Do not let oil or grease accumulate. For access to the front of the engine, the debris shield can be lifted up and tilted forward.

•Wipe the deck clean, particularly near the engine muffler.

•Clean the underside of the deck.

•Keep safety and operating decals clean and legible.

•Keep all operating control levers debris-free so they work properly.

CLEANING THE ENGINE

DEBRIS GUARD

It is extremely important to keep the engine debris guard (A, Figure 5-7) free of dirt and debris so the engine can run as efficiently and as cool as possible.

Brush the debris guard clean before using the unit each time and whenever you see a build-up of dirt and debris.

NOTE: The separate engine air cleaner must also be serviced according to the instructions in the Engine Owner’s Manual.

A

Figure 5-7

WARNING

Never run engine without debris guard properly installed. If debris guard is not properly installed, grass clippings may be drawn into engine, causing heat buildup and, in some cases, a fire.

Failure to comply can cause injury or property damage.

LUBRICATION

Applying light oil or a silicone-based lubricant to your machine allows parts to work more smoothly and protects them from the elements. The following are general guidelines:

Silicone-base Spray Lubricant (or light oil):

•Throttle control cable

•Control bail cable

•Nuts, bolts and other hardware

NOTE: The spindle head is perma- nently lubricated at the factory. There is no need for additional lubrication.

COMPACT STORAGE

For compact storage of the unit, re- move the two screws and locknuts se- curing the handlebar and carefully (to avoid kinking the cables) rotate the handlebar so that the upper portion rests on the engine and the handlebar legs face to the rear of the unit.

GENERAL ENGINE

MAINTENANCE

Perform the following engine mainte- nance for your engine according to the engine maintenance schedule and in- structions in the separate Engine Owner’s Manual:

Engine Oil Service

Check the engine oil level before start- ing the engine each day and check it after each 5 hours of continuous oper-

ation. Running the engine when it is low on oil will quickly ruin the engine.

Change the oil after every 25 hours of operation and even sooner when operating in extremely dirty or dusty conditions.

Air Cleaner Service

The engine air cleaner filters dirt and dust out of the air before it enters the carburetor. Operating the engine with a dirty, clogged air filter can cause poor performance and damage to the en- gine. Never operate the engine without the air cleaner installed. Inspect and service the air cleaner after every 25 operating hours, more often if operat- ing in very dusty or dirty conditions. Refer to the Engine Owner’s Manual for cleaning or replacement instructions.

Spark Plug Service

Inspect and clean or replace the spark plug after every 100 operating hours or annually. Refer to the Engine Owner’s Manual for cleaning or replacement instructions.

Spark Arrester Screen Service

If the engine is equipped with a spark arrester screen, remove and clean it according to the time intervals and instructions in the Engine Owner’s Manual.

Engine Cleaning

The engine must be kept clean to as- sure smooth operation and to prevent damage from overheating. Refer to the Engine Owner’s Manual for specific cleaning instructions.

Carburetor/Governor Control

Adjustments

The carburetor was adjusted at the fac- tory for best operating speed. Refer to the Engine Owner’s Manual for any ad- justment information.

The governor controls the maximum safe operating speed and protects the engine and other moving parts from

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Trimmer/Mower See Back Cover for Customer Service Information Do not put SafetyRemove key on electric start model Do not Use this equipment for its intended purpose onlyDo not allow children nearby if you are working Use only an approved containerNever make adjustments or repairs while engine is running Never run the engine inside a closed areaTrimmer line moves Replacing the trimmer lines. Let the engine coolAssembly To the outside of the handlebarFrom the hardware bag Tools/Supplies NeededUse a high-quality, SAE 30 weight Attach Throttle Control LeverMix oil with fuel Specified hardwareConnect and Charge Battery Electric Start Models Lift and tilt debris shield X, FigureFeatures and Controls Features and ControlsPRE-START Checklist Adjust Line Cutting HeightOperation IntroductionOperating TRIMMER/MOWER Using the Trimmer Head Control BailUSE the Correct Diameter Trimmer Line Additional Operating Tips and Techniques Maintenance Required Maintenance ScheduleAdjusting Trimmer Head Engagement Required MaintenanceRemoving and Replacing the Trimmer Head Inspecting / Replacing the Drive BeltBelt Inspection Belt RemovalBelt Replacement KR TCleaning the Engine Debris Guard General Engine MaintenanceTRIMMER/MOWER Cleaning and Debris Removal LubricationBattery Replacement Throttle Control AdjustmentOFF-SEASON Storage Store machine on a level surfaceMentals to help prevent girdling cut- ting of bark Changing Trimmer LinesTo Change Trimmer Lines Troubleshooting Problem Possible Cause CorrectionParts List Drawing noParts List Drawing no Ref. # Description QtyParts ListModels 52057 Ref. # DescriptionDrawing no Parts List Drawing no Accessories and KitsWarranty Service Customer Service and Technical ServiceReplacement Parts Engine Service and Repair

52058, 52057 specifications

The Troy-Bilt 52058 and 52057 are two impressive models in the Troy-Bilt lineup, known for their power, durability, and ease of use, making them popular choices for homeowners and garden enthusiasts alike.

The Troy-Bilt 52058 boasts a robust 306 cc OHV engine, providing the necessary power to tackle even the toughest of garden tasks. This model features a 24-inch cutting width, allowing it to cover large areas quickly. The Rear Tine Tiller design further enhances its capability, as it digs deep into the soil with its heavy-duty tines, ensuring that your garden bed can be prepared with minimal effort. One of the standout features is its patented forward and reverse tilling capability, which improves maneuverability and efficiency.

On the other hand, the Troy-Bilt 52057 comes with a slightly smaller 250 cc engine but remains powerful in its own right. It also incorporates a 16-inch tilling width, making it suitable for smaller gardens or tighter spaces. This model is engineered with a gear-driven transmission, providing superior handling and control while tilling. The adjustable tilling depth feature allows users to customize their tilling experience, whether they're breaking new ground or maintaining existing beds.

Both models are equipped with an ergonomic handle design, ensuring that users remain comfortable during prolonged use. The intuitive controls are easily accessible, allowing for smooth operation even for those who may not have extensive experience with gardening equipment. Additionally, Troy-Bilt has included a sturdy rear-wheel design in both models, which ensures stability and ease of movement across various terrains.

In terms of technology, these tillers are equipped with advanced features that maximize efficiency. The performance-enhancing tilling tines are designed to break up soil efficiently, reducing the time and effort needed for garden preparation. Furthermore, these models comply with modern emissions regulations, making them environmentally friendly choices for today’s gardeners.

Overall, the Troy-Bilt 52058 and 52057 represent a perfect blend of power, versatility, and user-friendly design. Whether you are preparing soil for planting or maintaining existing flower beds, these tillers offer the dependability and performance needed to achieve gardening success. With their strong build quality and thoughtful engineering, they are excellent investments for anyone serious about gardening.
Top Page Image Contents