Troy-Bilt 52058, 52057 owner manual Features and Controls

Page 9

Section

3

Features and Controls

Operating Symbols

Various symbols (shown here, with word descrip- tions) are used on the unit.

STOP

ENGINE

FAST

SLOW

STOP

TRIMMER

STOP

 

 

 

HEAD

ENGAGE DISENGAGE

BAILBAIL

FEATURES AND CONTROLS

This Section describes the location and function of the features and controls on your machine. Refer to the following Operation Section for detailed operat- ing instructions.

Do not start the engine until you read and understand all safety, controls and operating instructions in this Manual, the separate Engine Owner’s Manual, and on the decals on the machine.

IMPORTANT: Refer to the separate Engine Owner’s Manual for detailed information about the controls on the engine.

Trimmer Head Control Bail

Pull the control bail (A, Figure 3-1) up against the handlebar (engage bail) to start rotation of the trimmer head. Let go of the control bail (disengage bail) to stop the trimmer head.

Engine Throttle Control Lever

Use this lever (F, Figure 3-1) to regu- late engine speed and to stop the en- gine. The throttle settings are shown on the decal next to the lever.

Engine Recoil Starter

The recoil starter (G, Figure 3-1) is located at the rear of the engine and is used to pull start the engine.

Engine Debris Guard

The engine debris guard (H, Figure

3-1) protects the engine from accumu- lations of cut materials that can clog the engine cooling passages. See the Maintenance Section for information on servicing this important guard.

Fuel Primer Button

The fuel primer button (I, Figure 3-2) allows a cold engine to be primed for faster, easier starting.

Keyswitch (Electric Start Model)

On electric start models, the keyswitch (J, Figure 3-1) is used to start the engine. The keyswitch does not have an engine stop position. Use the Engine Throttle Control Lever (F) to stop the engine.

IMPORTANT: Remove key from keyswitch when leaving unit unat- tended to help prevent unauthorized or unintentional starting.

Battery (Electric Start Model)

On electric start models, the battery (K, Figure 3-1) will crank the engine starter motor when the keyswitch is turned to the start position. Do not crank engine longer than five (5) seconds per each starting attempt.

Cutting Height Settings

The trimmer head (B, Figure 3-1) is adjustable to an infinite number of height settings from 1-1/2" -to- 4-1/2".

Trimmer Line Holders

The trimmer lines are secured to line holders (C, Figure 3-1). Replacing the trimmer lines is a simple procedure (see Changing Trimming Lines in Section 5).

Handlebar Height Adjustment

The handlebar (D, Figure 3-1) has two height settings (see Adjust Handlebar Height in the Operation Section).

Plastic Debris Shield

The plastic debris shield (E, Figure 3-1) protects the engine from all manner of debris. The shield tilts forward for ac- cess to the engine.

 

F

 

A

 

J

 

G

 

H

E

D

 

K

I

Figure 3-2: Engine primer.

BC

Figure 3-1: Features and controls (electric start model shown).

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Trimmer/Mower See Back Cover for Customer Service Information Safety Do not putRemove key on electric start model Use this equipment for its intended purpose only Do notDo not allow children nearby if you are working Use only an approved containerNever run the engine inside a closed area Never make adjustments or repairs while engine is runningTrimmer line moves Replacing the trimmer lines. Let the engine coolTo the outside of the handlebar AssemblyFrom the hardware bag Tools/Supplies NeededAttach Throttle Control Lever Use a high-quality, SAE 30 weightMix oil with fuel Specified hardwareLift and tilt debris shield X, Figure Connect and Charge Battery Electric Start ModelsFeatures and Controls Features and ControlsAdjust Line Cutting Height PRE-START ChecklistOperation IntroductionUsing the Trimmer Head Control Bail Operating TRIMMER/MOWERUSE the Correct Diameter Trimmer Line Additional Operating Tips and Techniques Required Maintenance Schedule MaintenanceAdjusting Trimmer Head Engagement Required MaintenanceInspecting / Replacing the Drive Belt Removing and Replacing the Trimmer HeadBelt Inspection Belt RemovalKR T Belt ReplacementGeneral Engine Maintenance Cleaning the Engine Debris GuardTRIMMER/MOWER Cleaning and Debris Removal LubricationThrottle Control Adjustment Battery ReplacementOFF-SEASON Storage Store machine on a level surfaceChanging Trimmer Lines Mentals to help prevent girdling cut- ting of barkTo Change Trimmer Lines Problem Possible Cause Correction TroubleshootingDrawing no Parts ListRef. # Description Qty Parts List Drawing noRef. # Description Parts ListModels 52057Accessories and Kits Drawing no Parts List Drawing noCustomer Service and Technical Service Warranty ServiceReplacement Parts Engine Service and Repair

52058, 52057 specifications

The Troy-Bilt 52058 and 52057 are two impressive models in the Troy-Bilt lineup, known for their power, durability, and ease of use, making them popular choices for homeowners and garden enthusiasts alike.

The Troy-Bilt 52058 boasts a robust 306 cc OHV engine, providing the necessary power to tackle even the toughest of garden tasks. This model features a 24-inch cutting width, allowing it to cover large areas quickly. The Rear Tine Tiller design further enhances its capability, as it digs deep into the soil with its heavy-duty tines, ensuring that your garden bed can be prepared with minimal effort. One of the standout features is its patented forward and reverse tilling capability, which improves maneuverability and efficiency.

On the other hand, the Troy-Bilt 52057 comes with a slightly smaller 250 cc engine but remains powerful in its own right. It also incorporates a 16-inch tilling width, making it suitable for smaller gardens or tighter spaces. This model is engineered with a gear-driven transmission, providing superior handling and control while tilling. The adjustable tilling depth feature allows users to customize their tilling experience, whether they're breaking new ground or maintaining existing beds.

Both models are equipped with an ergonomic handle design, ensuring that users remain comfortable during prolonged use. The intuitive controls are easily accessible, allowing for smooth operation even for those who may not have extensive experience with gardening equipment. Additionally, Troy-Bilt has included a sturdy rear-wheel design in both models, which ensures stability and ease of movement across various terrains.

In terms of technology, these tillers are equipped with advanced features that maximize efficiency. The performance-enhancing tilling tines are designed to break up soil efficiently, reducing the time and effort needed for garden preparation. Furthermore, these models comply with modern emissions regulations, making them environmentally friendly choices for today’s gardeners.

Overall, the Troy-Bilt 52058 and 52057 represent a perfect blend of power, versatility, and user-friendly design. Whether you are preparing soil for planting or maintaining existing flower beds, these tillers offer the dependability and performance needed to achieve gardening success. With their strong build quality and thoughtful engineering, they are excellent investments for anyone serious about gardening.
Top Page Image Contents