Troy-Bilt Safety Guidelines for Lawn Mowers and How to Find a Motor Dealer Near You
Page 5

Section 1: Safety

2.Never run the engine inside a closed area.

3.Never clean, or make adjustments or repairs with the engine running. Disconnect the spark plug wire and keep the wire away from the plug to prevent accidental starting. Remove key on electric start models.

4.Keep all nuts and bolts tight, espe- cially the trimmer head attachment bolts, and keep equipment in good condition. Check mounting hardware on trimmer head every time you change trimmer line and prior to each use.

5.Never tamper with safety devices. Check their proper operation regularly.

6.To reduce fire hazard, keep mower free of grass, leaves or other debris build-up. Clean up oil or fuel spills. Let machine cool before storing.

7.After striking an object, stop the engine and disconnect the spark plug wire. Inspect the machine and repair, if necessary, before restarting.

8.Never make adjustments or repairs while engine is running.

9.Components subject to wear, damage and deterioration could ex- pose moving parts or allow objects to be thrown. Frequently check compo- nents and replace with factory recom- mended parts, when necessary. Regularly inspect the trimmer head

and debris shield. Make sure they are not bent, damaged, or loose.

10.Only use eighteen-inch long .130" or .155" diameter trimmer line. Never use other lengths, diameters or material as trimmer line.

11.Trimmer line moves

at high speed and can cut. Always stop the engine and let all mov- ing parts stop before

replacing the trimmer lines. Let the engine cool.

12.Do not change the engine gover- nor setting or overspeed the engine. The governor controls maximum safe operating speed and protects the en- gine and all moving parts from dam- age caused by overspeed. Authorized service shall be sought if a problem exists.

13.Do not touch engine parts which may be hot from operation. Allow parts to cool completely before in- specting, cleaning or repairing the unit.

14.Maintain or replace safety and in- structional decals. Refer to the Parts List for replacement decal information.

15.Use only original-equipment replacement parts. Parts manufac- tured by others could present safety hazards and affect performance even though they may fit on this machine.

16.Remember – the end of the sea- son is a good time to inspect equip- ment prior to storage.

17.To guard against engine overheat- ing, always keep the engine debris guard mounted and clean.

18.For units equipped with electric start:

a)Batteries produce explosive gases. Keep sparks, flame, cigarettes, etc., away. Ventilate area when charging battery. Do not charge battery in an airtight space.

b)Do not use a battery charger other than the one provided with the unit.

c)The battery contains toxic mate- rials. Do not damage the battery case. If the case is broken or damaged, avoid contact with the battery contents.

d)Properly dispose of a damaged or worn out battery. Check with local authorities for proper dis- posal methods.

e)Do not short circuit the battery. Severe burns and fire can result.

Safety Decals

Make certain that all safety decals on this equipment are kept clean and in good condition. The decals are shown (at reduced sizes) below. If you need a replacement decal, refer to the Parts List in this Manual.

WARNING

THROWN OBJECT HAZARD

•Objects will be thrown violently by the cutting head, resulting in significant hazard!

•Keep children, pets and bystanders 50 feet away from machine while operating.

•Be alert to hidden obstacles.

READ OWNERS MANUAL

If you need a replacement manual, write to the address listed on the serial number decal on this unit.

ROTATING CUTTING HEAD

Do not service or adjust cutting head or other moving parts unless engine is stopped and spark plug wire is disconnected.

1918115 (12/99)

At front of deck

On engine, above muffler

On left

handlebar

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Trimmer/Mower See Back Cover for Customer Service Information Remove key on electric start model SafetyDo not put Use this equipment for its intended purpose only Do notDo not allow children nearby if you are working Use only an approved containerNever run the engine inside a closed area Never make adjustments or repairs while engine is runningTrimmer line moves Replacing the trimmer lines. Let the engine coolTo the outside of the handlebar AssemblyFrom the hardware bag Tools/Supplies NeededAttach Throttle Control Lever Use a high-quality, SAE 30 weightMix oil with fuel Specified hardwareLift and tilt debris shield X, Figure Connect and Charge Battery Electric Start ModelsFeatures and Controls Features and ControlsAdjust Line Cutting Height PRE-START ChecklistOperation IntroductionUSE the Correct Diameter Trimmer Line Using the Trimmer Head Control BailOperating TRIMMER/MOWER Additional Operating Tips and Techniques Required Maintenance Schedule MaintenanceAdjusting Trimmer Head Engagement Required MaintenanceInspecting / Replacing the Drive Belt Removing and Replacing the Trimmer HeadBelt Inspection Belt RemovalKR T Belt ReplacementGeneral Engine Maintenance Cleaning the Engine Debris GuardTRIMMER/MOWER Cleaning and Debris Removal LubricationThrottle Control Adjustment Battery ReplacementOFF-SEASON Storage Store machine on a level surfaceTo Change Trimmer Lines Changing Trimmer LinesMentals to help prevent girdling cut- ting of bark Problem Possible Cause Correction TroubleshootingDrawing no Parts ListRef. # Description Qty Parts List Drawing noRef. # Description Parts ListModels 52057Accessories and Kits Drawing no Parts List Drawing noCustomer Service and Technical Service Warranty ServiceReplacement Parts Engine Service and Repair

52058, 52057 specifications

The Troy-Bilt 52058 and 52057 are two impressive models in the Troy-Bilt lineup, known for their power, durability, and ease of use, making them popular choices for homeowners and garden enthusiasts alike.

The Troy-Bilt 52058 boasts a robust 306 cc OHV engine, providing the necessary power to tackle even the toughest of garden tasks. This model features a 24-inch cutting width, allowing it to cover large areas quickly. The Rear Tine Tiller design further enhances its capability, as it digs deep into the soil with its heavy-duty tines, ensuring that your garden bed can be prepared with minimal effort. One of the standout features is its patented forward and reverse tilling capability, which improves maneuverability and efficiency.

On the other hand, the Troy-Bilt 52057 comes with a slightly smaller 250 cc engine but remains powerful in its own right. It also incorporates a 16-inch tilling width, making it suitable for smaller gardens or tighter spaces. This model is engineered with a gear-driven transmission, providing superior handling and control while tilling. The adjustable tilling depth feature allows users to customize their tilling experience, whether they're breaking new ground or maintaining existing beds.

Both models are equipped with an ergonomic handle design, ensuring that users remain comfortable during prolonged use. The intuitive controls are easily accessible, allowing for smooth operation even for those who may not have extensive experience with gardening equipment. Additionally, Troy-Bilt has included a sturdy rear-wheel design in both models, which ensures stability and ease of movement across various terrains.

In terms of technology, these tillers are equipped with advanced features that maximize efficiency. The performance-enhancing tilling tines are designed to break up soil efficiently, reducing the time and effort needed for garden preparation. Furthermore, these models comply with modern emissions regulations, making them environmentally friendly choices for today’s gardeners.

Overall, the Troy-Bilt 52058 and 52057 represent a perfect blend of power, versatility, and user-friendly design. Whether you are preparing soil for planting or maintaining existing flower beds, these tillers offer the dependability and performance needed to achieve gardening success. With their strong build quality and thoughtful engineering, they are excellent investments for anyone serious about gardening.
Top Page Image Contents