Troy-Bilt 52057, 52058 owner manual Connect and Charge Battery Electric Start Models

Page 8

Section 2: Assembly

STEP 6: Connect and Charge Battery (Electric Start Models)

DANGER

•Wet conditions can cause an elec- tric shock hazard during battery recharging. Avoid wet conditions when charging battery.

•Recharging the battery with im- proper equipment could cause a battery explosion. Use only the bat- tery charger shipped with the unit. The engine must be shut off and the spark plug wire disconnected and moved away from the spark plug.

Failure to comply could result in personal injury or property damage.

1. Lift and tilt debris shield (X, Figure

2-5) forward to view battery (P). Connect the red wire (R, Figure 2-6) to the positive (+) red-coded terminal on the battery. Then, connect the black wire (S) to the negative (–) black- coded terminal on the battery. Close the debris shield (X, Figure 2-5).

2. Connect the small plug (U, Figure

2-7) on the battery recharger cord to the wire harness plug (V) located near the keyswitch. Then, plug the charger box (W) into a grounded, 120V wall outlet.

3. Charge the battery for 24 hours. After charging, first unplug the charger box (W) from the wall outlet, then dis- connect the recharging line plugs (U and V).

X

P

Figure 2-5: Lift and tilt debris shield forward to access battery.

S

R

Figure 2-6

 

 

W

V U

Figure 2-7

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Trimmer/Mower See Back Cover for Customer Service Information Remove key on electric start model SafetyDo not put Do not Use this equipment for its intended purpose onlyDo not allow children nearby if you are working Use only an approved containerNever make adjustments or repairs while engine is running Never run the engine inside a closed areaTrimmer line moves Replacing the trimmer lines. Let the engine coolAssembly To the outside of the handlebarFrom the hardware bag Tools/Supplies NeededUse a high-quality, SAE 30 weight Attach Throttle Control LeverMix oil with fuel Specified hardwareConnect and Charge Battery Electric Start Models Lift and tilt debris shield X, FigureFeatures and Controls Features and ControlsPRE-START Checklist Adjust Line Cutting HeightOperation IntroductionUSE the Correct Diameter Trimmer Line Using the Trimmer Head Control BailOperating TRIMMER/MOWER Additional Operating Tips and Techniques Maintenance Required Maintenance ScheduleAdjusting Trimmer Head Engagement Required MaintenanceRemoving and Replacing the Trimmer Head Inspecting / Replacing the Drive BeltBelt Inspection Belt RemovalBelt Replacement KR TCleaning the Engine Debris Guard General Engine MaintenanceTRIMMER/MOWER Cleaning and Debris Removal LubricationBattery Replacement Throttle Control AdjustmentOFF-SEASON Storage Store machine on a level surfaceTo Change Trimmer Lines Changing Trimmer LinesMentals to help prevent girdling cut- ting of bark Troubleshooting Problem Possible Cause CorrectionParts List Drawing noParts List Drawing no Ref. # Description QtyParts ListModels 52057 Ref. # DescriptionDrawing no Parts List Drawing no Accessories and KitsWarranty Service Customer Service and Technical ServiceReplacement Parts Engine Service and Repair

52058, 52057 specifications

The Troy-Bilt 52058 and 52057 are two impressive models in the Troy-Bilt lineup, known for their power, durability, and ease of use, making them popular choices for homeowners and garden enthusiasts alike.

The Troy-Bilt 52058 boasts a robust 306 cc OHV engine, providing the necessary power to tackle even the toughest of garden tasks. This model features a 24-inch cutting width, allowing it to cover large areas quickly. The Rear Tine Tiller design further enhances its capability, as it digs deep into the soil with its heavy-duty tines, ensuring that your garden bed can be prepared with minimal effort. One of the standout features is its patented forward and reverse tilling capability, which improves maneuverability and efficiency.

On the other hand, the Troy-Bilt 52057 comes with a slightly smaller 250 cc engine but remains powerful in its own right. It also incorporates a 16-inch tilling width, making it suitable for smaller gardens or tighter spaces. This model is engineered with a gear-driven transmission, providing superior handling and control while tilling. The adjustable tilling depth feature allows users to customize their tilling experience, whether they're breaking new ground or maintaining existing beds.

Both models are equipped with an ergonomic handle design, ensuring that users remain comfortable during prolonged use. The intuitive controls are easily accessible, allowing for smooth operation even for those who may not have extensive experience with gardening equipment. Additionally, Troy-Bilt has included a sturdy rear-wheel design in both models, which ensures stability and ease of movement across various terrains.

In terms of technology, these tillers are equipped with advanced features that maximize efficiency. The performance-enhancing tilling tines are designed to break up soil efficiently, reducing the time and effort needed for garden preparation. Furthermore, these models comply with modern emissions regulations, making them environmentally friendly choices for today’s gardeners.

Overall, the Troy-Bilt 52058 and 52057 represent a perfect blend of power, versatility, and user-friendly design. Whether you are preparing soil for planting or maintaining existing flower beds, these tillers offer the dependability and performance needed to achieve gardening success. With their strong build quality and thoughtful engineering, they are excellent investments for anyone serious about gardening.
Top Page Image Contents