Troy-Bilt 52058, 52057 owner manual Safety, Do not put, Remove key on electric start model

Page 3

Section

1

Safety

SPARK ARRESTER WARNING TO RESIDENTS OF CALIFORNIA AND SEVERAL OTHER STATES

Under California law, and under the laws of several other states, you are not permitted to operate an internal combustion engine using hydrocarbon fuels on any forest covered, brush covered, or grass covered land, or on land covered with grain, hay, or other flammable agricultural crop, without an en-

gine spark arrestor in continuous effective working order.

The engine on your power equipment, like most outdoor power equipment, is an internal combustion engine that burns gasoline, a hydrocarbon fuel. Therefore, your power equipment must be equipped with a spark arrestor muffler in continu- ous effective working order. The spark arrester must be attached to the engine exhaust system in such a manner that flames or heat from the system will not ignite flammable material. Failure of the owner/operator of the equipment to comply with this regulation is a misdemeanor under California law, and may also be a violation of other state and/or federal regulations, laws, ordinances, or codes. Contact your local fire marshal or forest service for specific information about what regulations apply in your area.

IMPORTANT

Safe Operation Practices for Walk-Behind Mowers

This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

General Operation

1.Read, understand, and follow all instructions on the machine and in the manuals. Be thoroughly familiar with the controls and the proper use of the equipment before starting.

2.Do not put

hands or feet near or under rotating parts. Keep clear of the ro- tating trimmer head and line at all times.

3.Only allow responsible adults, who are familiar with the instructions, to operate the trimmer/mower. Never let children or untrained adults oper- ate this equipment.

4.Inspect the area where the ma- chine is to be used. The machine can propel small objects at high speed, causing personal injury or property damage. Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could be picked up and thrown by the trimmer line.

5.Be sure the area is clear of other people (particularly small children and pets) before mowing. Stop machine if anyone enters the area. Keep by- standers at least 50 feet from the area of operation.

6.Do not operate the machine when barefoot or wearing open sandals. Always wear substantial footwear.

7.Wear appropriate clothing such as a long-sleeved shirt or jacket. Also wear long trousers or slacks. Do not wear shorts.

8.Do not wear loose clothing– it could catch in the equipment.

9.Do not mow in reverse unless absolutely necessary. Always look down and behind before and while moving backwards.

10.Do not operate the trimmer/mower without proper guards, plates, or other protective safety devices in place.

11.Refer to provided instructions for proper operation and installation of ac- cessories. Only use factory-approved accessories.

12.Stop trimmer head when crossing gravel drives, walks, or roads. Wait for trimmer lines to stop.

13. Stop engine and discon- nect spark plug wire from spark plug whenever you leave the unit, clean

the equipment, or replace trimmer line.

Remove key on electric start model.

14.Wait until the trimmer head comes to a complete stop, shut the engine off, and disconnect the spark plug wire before installing or removing trimmer line. Be sure trimmer head is securely attached before operating equipment.

15.Mow only during daylight hours or when good artificial light is available.

16.Do not operate the machine while under the influence of alcohol or drugs, or when tired or ill.

17.Never operate this equipment in wet grass. Be sure of your footing; keep a firm hold on the handlebar and walk; never run.

18.Release the Trimmer Head Control Bail before starting the engine.

19.If the unit starts to vibrate abnor- mally, stop the engine and disconnect the spark plug wire. Check immedi- ately for the cause. Vibration is gener- ally a warning of trouble.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Trimmer/Mower See Back Cover for Customer Service Information Safety Do not putRemove key on electric start model Use only an approved container Do notUse this equipment for its intended purpose only Do not allow children nearby if you are workingReplacing the trimmer lines. Let the engine cool Never make adjustments or repairs while engine is runningNever run the engine inside a closed area Trimmer line movesTools/Supplies Needed AssemblyTo the outside of the handlebar From the hardware bagSpecified hardware Use a high-quality, SAE 30 weightAttach Throttle Control Lever Mix oil with fuelLift and tilt debris shield X, Figure Connect and Charge Battery Electric Start ModelsFeatures and Controls Features and ControlsIntroduction PRE-START ChecklistAdjust Line Cutting Height OperationUsing the Trimmer Head Control Bail Operating TRIMMER/MOWERUSE the Correct Diameter Trimmer Line Additional Operating Tips and Techniques Required Maintenance MaintenanceRequired Maintenance Schedule Adjusting Trimmer Head EngagementBelt Removal Removing and Replacing the Trimmer HeadInspecting / Replacing the Drive Belt Belt InspectionKR T Belt ReplacementLubrication Cleaning the Engine Debris GuardGeneral Engine Maintenance TRIMMER/MOWER Cleaning and Debris RemovalStore machine on a level surface Battery ReplacementThrottle Control Adjustment OFF-SEASON StorageChanging Trimmer Lines Mentals to help prevent girdling cut- ting of barkTo Change Trimmer Lines Problem Possible Cause Correction TroubleshootingDrawing no Parts ListRef. # Description Qty Parts List Drawing noRef. # Description Parts ListModels 52057Accessories and Kits Drawing no Parts List Drawing noEngine Service and Repair Warranty ServiceCustomer Service and Technical Service Replacement Parts

52058, 52057 specifications

The Troy-Bilt 52058 and 52057 are two impressive models in the Troy-Bilt lineup, known for their power, durability, and ease of use, making them popular choices for homeowners and garden enthusiasts alike.

The Troy-Bilt 52058 boasts a robust 306 cc OHV engine, providing the necessary power to tackle even the toughest of garden tasks. This model features a 24-inch cutting width, allowing it to cover large areas quickly. The Rear Tine Tiller design further enhances its capability, as it digs deep into the soil with its heavy-duty tines, ensuring that your garden bed can be prepared with minimal effort. One of the standout features is its patented forward and reverse tilling capability, which improves maneuverability and efficiency.

On the other hand, the Troy-Bilt 52057 comes with a slightly smaller 250 cc engine but remains powerful in its own right. It also incorporates a 16-inch tilling width, making it suitable for smaller gardens or tighter spaces. This model is engineered with a gear-driven transmission, providing superior handling and control while tilling. The adjustable tilling depth feature allows users to customize their tilling experience, whether they're breaking new ground or maintaining existing beds.

Both models are equipped with an ergonomic handle design, ensuring that users remain comfortable during prolonged use. The intuitive controls are easily accessible, allowing for smooth operation even for those who may not have extensive experience with gardening equipment. Additionally, Troy-Bilt has included a sturdy rear-wheel design in both models, which ensures stability and ease of movement across various terrains.

In terms of technology, these tillers are equipped with advanced features that maximize efficiency. The performance-enhancing tilling tines are designed to break up soil efficiently, reducing the time and effort needed for garden preparation. Furthermore, these models comply with modern emissions regulations, making them environmentally friendly choices for today’s gardeners.

Overall, the Troy-Bilt 52058 and 52057 represent a perfect blend of power, versatility, and user-friendly design. Whether you are preparing soil for planting or maintaining existing flower beds, these tillers offer the dependability and performance needed to achieve gardening success. With their strong build quality and thoughtful engineering, they are excellent investments for anyone serious about gardening.
Top Page Image Contents