Troy-Bilt LS 27 TB warranty Before Each Use, Using the Log Splitter, Operating Tips

Page 10

4

Operating

Your Log

Splitter

WARNING

Never remove partially split wood from the wedge with your hands. Fingers may be- come trapped between split wood.

Figure 4-3

Before Each Use

1.Remove the dipstick and check hydraulic fluid level. Refill if necessary. Approved fluids include Dexron® III / Mercon® III automatic transmission fluid, a

10 Weight AW hydraulic oil or Pro-Mix™ AW-32 Hydraulic Oil.

2.Check engine oil level. Refill if necessary.

3.Fill up gasoline if necessary.

4.Lubricate the beam area where splitting wedge will slide with engine oil. Do not use grease to lubricate. Make sure to lubricate both the front and the back of the beam face.

5.Attach spark plug wire to the spark plug.

Using the Log Splitter

1.Place the log splitter on level, dry ground.

2.Place the beam in either the horizontal or vertical position and lock in place with the appropriate locking rod.

3.Block the front and back of both wheels.

4.Place the log against the end plate and only split wood in the direction of the grain.

5.To stabilize the log, place your hand only on sides of log. Never place hand on the end between the log and the splitting wedge.

6.Only one adult should stabilize the log and operate the control handle, so the operator has full control over the log and the splitting wedge.

Control Handle

1.Move control handle FORWARD or DOWN to split wood.

2.Release the control handle to stop the wedge move- ment.

3.Move control handle BACK or UP to return the wedge.

Log Dislodger

The log dislodger is designed to remove any partially split wood from the wedge. This may occur while splitting large diameter wood or freshly cut wood.

WARNING: Never remove partially split wood from the wedge with your hands. Fingers may become trapped between split wood.

1.To remove partially split wood from wedge, move control handle to REVERSE position until wedge is fully retracted to allow split wood portion to contact the log dislodger.

2.Once removed from wedge with log dislodger, split wood from opposite end or in another location.

Vertical Position

1.Pull the horizontal beam lock out to release the beam and pivot the beam to the vertical position.

2.To lock the beam in the vertical position, pull out on the vertical beam lock and rotate it to secure the beam. See Figure 4-1.

3.Stand in front of the unit to operate the control handle and to stabilize the log. See Figure 4-3.

Horizontal Position

1.Pull the vertical beam lock out and rotate it down. See Figure 4-1. Pivot beam to the horizontal position. The beam will lock automatically in horizontal position.

2.Stand behind the reservoir tank to operate control handle and to stabilize the log.

Operating Tips

Always:

1.Use clean fluid and check fluid level regularly.

2.Use an approved hydraulic fluid. Approved fluids include Dexron® III / Mercon® III automatic transmis- sion fluid, a 10 Weight AW hydraulic oil or Pro-Mix™ AW-32 Hydraulic Oil.

3.Use a filter (clean or replace regularly).

4.Use a breather cap on fluid reservoir.

5.Make sure pump is mounted and aligned properly.

6.Use a flexible “spider” type coupling between engine and pump drive shafts.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio LS 27 TB Log Splitter04/25/2007 Finding and Recording Model Number Table of ContentsCustomer Support Safety Labels Safety Labels Found On Your Log SplitterGeneral Practices Your ResponsibilityPreparation Operation Maintenance and Storage Assembling the Tongue Setting Up Your Log SplitterConnecting Cylinder to Beam Attaching the Jack StandPreparing the Log Splitter Engine Controls Know Your Log SplitterBeam Locks WedgeGas and Oil Fill-Up Operating Your Log SplitterStopping Engine Control HandleBefore Each Use Using the Log SplitterOperating Tips Never Raising and Lowering BeamTransporting the Log Splitter To lower the beamConditions that Will Void Warranty Gib AdjustmentWedge Assembly Adjustment Maintaining Your Log SplitterHose Clamps Hydraulic Fluid and Inlet FilterBeam and Splitting Wedge EngineSet Screw Install nylon spider onto engine coupling halfTires Side View-Coupler 0600Storing Your Log Splitter Replace spark plugProblem Cause Remedy Cause RemedyConditions Low horsepower/weak engine Engine stalls during Low horsepower/weak engineService dealer RetractingModel LS 27 TB 1800828-5500 Parts ListDescription MANUFACTURER’S Limited Warranty for Manual DEL Operador LS 27 TB Máquina rompetroncosAsistencia al cliente ÍndiceBúsqueda y registro del número de modelo Asistencia a través de su distribuidorTroy-BiltEtiquetas Seguridad AdvertenciaPreparativos ResponsabilidadPrácticas generales No ajuste los valores de presión de la bomba o válvulaDel combustible FuncionamientoSu responsabilidad MientoColocación de la lengüeta Montaje de la lengüetaColocación del gato Manipulación mecánicoPreparación de la máquina rompetroncos Haga rodar el tronco fuera de la caja de abajoBloqueos de la vigueta Controles del motorManija de control Detención del motorFuncionami Ento de la Máquina Rompetroncos Encendido del motorUso de la máquina rompetroncos Antes de cada usoConsejos de operación Nunca Elevación y descenso de la viguetaConecte las cadenas de seguridad al vehículo de remolque Ajuste del montaje de la cuña Ajuste del retenedorCondiciones que anulan la garantía Abrazaderas de la manguera Fluido hidráulico y filtro de entradaVigueta y cuña de corte MotorTornillo de fijación Vista lateral Acoplador NeumáticosSujete con las tuercas extraidas anteriormente Limpie la máquina rompetroncos por completo Almacenamiento de la máquina rom- petroncosVuelva a colocar la bujía Problema Cause Solución Velocidad del motor lenta Velocidad lenta del ejeDel cilindro durante la El mantenimiento Vuelva a llenarloModelo LS 27 TB Lista de Piezas Nº de pieza DescripciónGarantía Limitada DEL Fabricante Para

LS 27 TB specifications

The Troy-Bilt LS 27 TB is an innovative garden tiller designed to enhance productivity in any small to medium-sized gardening or landscaping project. This robust machine features a powerful engine and advanced technologies that streamline the tilling process, making it a valuable tool for both amateur gardeners and seasoned horticulture professionals.

One of the standout features of the LS 27 TB is its 27-inch tilling width. This ample width allows users to cover more ground in less time, reducing the number of passes required to prepare the soil. The tiller's adjustable tilling depth—ranging from 1 to 8 inches—enables precise soil preparation for varying plant root depths, ensuring optimal growing conditions for various crops.

Powered by a reliable, easy-start engine, the Troy-Bilt LS 27 TB offers ample horsepower to tackle tough soil conditions without compromising performance. The machine's forward and reverse gear options provide enhanced maneuverability, allowing gardeners to navigate tight corners and difficult spots with ease.

Incorporated into the design is the patented “Cultivator Attachment” system, which allows users to switch from tilling to cultivating tasks effortlessly. This versatility makes the LS 27 TB an excellent choice for multi-purpose gardening, as it can handle not only tilling but also other gardening tasks efficiently.

Safety is a priority with the LS 27 TB, which features a handlebar-mounted control system. This ergonomic design provides users with greater comfort while working, reducing fatigue during extended use. The tiller is also equipped with an automatic engagement system for the tines, ensuring that users can operate the machine with confidence.

Another notable characteristic of this tiller is its durable construction. Built to withstand the rigors of frequent use, the Troy-Bilt LS 27 TB features high-quality materials that ensure longevity. The robust wheels provide excellent traction, making it easier to navigate uneven terrain.

In summary, the Troy-Bilt LS 27 TB is a powerful and versatile tiller that combines innovative features, user-friendly controls, and durability. Whether preparing a small garden bed or working on a larger landscaping project, this tiller offers the performance and versatility needed to achieve gardening goals with ease. Its blend of technology and user-centric design sets it apart in the market, making it an ideal choice for anyone looking to enhance their gardening experience.
Top Page Image Contents