TRENDnet TW100-BRM504 manual Internet, System, Buttons

Broadband ADSL Router User Guide

UpStream	Displays the speed for the UpStream Connection.
Connection Speed
DSL Multiplexing	Indicates the current DSL Multiplexing method (LLC-Based or
Method	VC-Based)
VPI	Indicates the current VPI setting for the DSL connection
VCI	Indicates the current VCI setting for the DSL connection
Internet
Connection Method	Displays the current connection method.
Connection Status	This indicates the current status of the Internet Connection.
	• Active - Connection exists
	• Idle - No current connection, but no error has been detected.
	This condition normally arises when an idle connection is
	automatically terminated.
	• Failed - The connection was terminated abnormally. This
	could be caused by Modem failure, or the loss of the connec-
	tion to the ISP's server.
	If there is an error, you can click the "Connection Details" button
	to find out more information.
Internet IP Address	This IP Address is allocated by the ISP (Internet Service Pro-
	vider). If using a dynamic IP address, and no connection currently
	exists, this information is unavailable.
Connection Details	Click this button to open a sub-window and view a detailed
	description of the current connection. Depending on the type of
	connection, a "log" may also be available.
LAN
IP Address	The IP Address of the TW100-BRM504.
Network Mask	The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server	This shows the status of the DHCP Server function. The value
	will be "Enabled" or "Disabled".
MAC Address	This shows the MAC Address for the TW100-BRM504, as seen
	on the LAN interface.
System
Device Name	The current name of the TW100-BRM504. This is also the
	"hostname" provided to ISPs who request this information.
Firmware Version	The version of the current firmware installed.
Buttons
Connection Details	Click this button to open a sub-window and view a detailed
	description of the current connection. Depending on the type of
	connection, a "log" may also be available.
Attached Devices	This will open a sub-window, showing all LAN devices currently
	on the network.
Refresh Screen	Update the data displayed on screen.

30