TRENDnet TW100-BRM504 manual Data Incoming Rules Screen, Inbound Services

Broadband ADSL Router User Guide

Incoming Rules

This screen is displayed when the "Add" or "Edit" button for Incoming Rules is clicked.

Figure 29: Inbound Services Screen

Data – Incoming Rules Screen

Inbound Services

Service	Select the desired Service. This determines which packets are covered by
	this rule. If necessary, you can define a new Service on the "Services"
	screen, by defining the protocols and port numbers used by the Service.
Action	Select the desired action for packets covered by this rule:
	•	ALLOW always
	• ALLOW by schedule, otherwise Block
	•	BLOCK always
	• BLOCK by schedule, otherwise Allow

Note:

•Any inbound traffic which is not allowed by rules you create will be blocked by the Default rule.

•BLOCK rules are only useful if the traffic is already covered by an ALLOW rule. (That is, you wish to block a sub-set of traffic which is currently allowed by another rule.)

•To define the Schedule used in these selections, use the "Schedule" screen.

Send to	Select the PC or Server on your LAN which will receive the inbound
LAN Server	traffic covered by this rule.
WAN Users	These settings determine which packets are covered by the rule, based
	on their source (WAN) IP address. Select the desired option:
	• Any - All IP addresses are covered by this rule.
	• Address range - If this option is selected, you must enter the
	desired values in the "Single/Start" and "Finish" fields to determine
	the address range.
	• Single address - Enter the required address in the "Single/Start"
	fields.

40