TRENDnet TW100-BRM504 Configuring Other Routers on your LAN, Data Routing Screen, Local Router

Appendix A - Troubleshooting

Figure 44: Routing Screen

Data - Routing Screen

RIP

RIP Direction	Select the desired RIP Direction.
RIP Version	Choose the RIP Version for the Server.
Static Routing
Static Routing	This list shows all entries in the Routing Table.
Table Entries	• This area shows details of the selected item in the list.
	• Change any the properties as required, then click the "Edit"
	button to save the changes to the selected entry.
Buttons
Add	Add a new entry to the Static Routing table, using the data shown in
	the "Properties" area on screen. The entry selected in the list is
	ignored, and has no effect.
Edit	Update the current Static Routing Table entry, using the data shown
	in the table area on screen.
Delete	Delete the current Static Routing Table entry.
Save	Save the RIP setting. This has no effect on the Static Routing Table.

Configuring Other Routers on your LAN

It is essential that all IP packets for devices not on the local LAN be passed to the TW100- BRM504, so that they can be forwarded to the external LAN, WAN, or Internet. To achieve this, the local LAN must be configured to use the TW100-BRM504 as the Default Route or Default Gateway.

Local Router

The local router is the Router installed on the same LAN segment as the TW100-BRM504. This router requires that the Default Route is the TW100-BRM504 itself. Typically, routers have a special entry for the Default Route. It should be configured as follows.

63