Chapter 2 | 2 |
| |
Installation |
|
This Chapter covers the physical installation of the
Requirements
•Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
•TCP/IP protocol must be installed on all PCs.
•For Internet Access, an Internet Access account with an ISP, and a DSL connection.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the TW100- BRM504. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard LAN cable. Any LAN port on the
3. Connect ADSL Cable
Connect the supplied ADSL cable from to the WAN port on the
6