Broadband ADSL Router User Guide
Physical Details
Front-mounted LEDs
Power LED (Green)
Status LED (Yellow)
Figure 2: Front Panel
On - Power on.
Off - No power.
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware Up- grade.
LAN | For each port, there are 2 LEDs, to indicate the connection speed |
| (10BaseT or 100BaseT) of each port. |
| • 100BT - This will be ON if the LAN connection is using 100BaseT, |
| and Blinking if data is being transferred via the corresponding LAN |
| port. |
| • 10BT - This will be ON if the LAN connection is using 10BaseT, and |
| Blinking if data is being transferred via the corresponding LAN port. |
| • If neither LED is on, there is no active connection on the correspond- |
| ing LAN port. |
WAN | On - ADSL connection is available. |
| Off - No ADSL connection. |
| Flashing - Data is being transmitted or received via the ADSL connection. |
4