SUPER MICRO Computer 6014P-82R, 6014P-8R Installing/removing hot-swap Scsi drive carrier

SUPERSERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual

2.Installing/removing hot-swap SCSI drive carrier

The SCSI drive bays are located in the front of the chassis, making them easily accessible for installation and removal. The SCSI drives are hot- swap units, meaning that they can be installed and removed while the sys- tem is running. To remove a SCSI drive, first push the colored release button located beside the drive's LEDs (1) , then swing the handle fully out (2a) and use it to pull the SCSI drive carrier straight out (2b) (Figure 6-4).

Figure 6-4. Removing a SCSI Drive Carrier

2a

2b

!	Important: All of the SCSI drive carriers must remain in
	the drive bays to maintain proper airflow.

6-6