![](/images/new-backgrounds/1225240/225240225x1.webp)
Appendix B: Software Installation
Adding/Deleting Hotspares
Note: In order to rebuild a RAID (RAID 0 or RAID 1), you need to add a new HDD as a hotspare.
1.Turn on your computer and press Ctrl+A as prompted to access the ARC Utility.
2.From the ARC menu, select Array Configuration Utility (ACU).
3.From the ACU menu, select Add/Delete Hotspares.
4.Use the up and down arrow keys to highlight and select the disk you want to designate as a hotspare, and press Insert, then press Enter.
5.Select Yes when the following prompt is displayed:
"Do you want to create spare?" (Yes/No?)
The spare you have selected will appear in the Select Drive Menu.