SUPERSERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual

z1U passive heatsink (SNK-P0009, optional)

zOne (1) CD containing drivers and utilities

zSuperServer 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6014P-8/6014P-8R/6014P-82R/6014P-82 lies the X6DHP-8G/X6DHP-8G2, a dual processor serverboard based on Intel's E7520 chipset. Below are the main features of the X6DHP-8G/X6DHP- 8G2 (see Figure 1-1 for a block diagram of the chipset).

Processors

The X6DHP-8G/X6DHP-8G2 supports single or dual 604-pin Intel Xeon EM64T type processors at a FSB speed of 800 MHz. Please refer to the serverboard description pages on our web site for a complete listing of supported processors (www.supermicro.com).

Memory

The X6DHP-8G has six 184-pin DIMM sockets that can support up to 12 GB of registered ECC DDR333 (PC2700) or up to 24 GB of registered ECC DDR266 (PC2100) SDRAM. The X6DHP-8G2 has eight 240-pin DIMM sockets that can support up to 16 GB of DDR2-400 SDRAM. Both serverboards employ an interleaved configuration, which requires modules of the same size and speed to be installed in pairs. Please refer to Chapter 5 for memory speed jumper settings.

Onboard SCSI

SCSI is provided with an Adaptec AIC-7902 SCSI chip, which supports dual channel Ultra320 SCSI at a throughput of 320 MB/sec (each channel). The X6DHP-8G/X6DHP-8G2 provides two LVD Ultra320 SCSI ports.

Onboard Controllers/Ports

One floppy drive controller and two ATA/100 controllers are provided to support up to four IDE hard drives or ATAPI devices. The color-coded I/O ports include one COM port, a VGA (monitor) port, two USB 2.0 ports, PS/ 2 mouse and keyboard ports and two gigabit Ethernet ports. (The rear COM port is available with the use of a COM port kit (included with the system). COM1 and COM2 are both headers on the X6DHP-8G/X6DHP-8G2.

1-2

Page 12
Image 12
SUPER MICRO Computer 6014P-82R, 6014P-8R Serverboard Features, Processors Memory, Onboard Scsi, Onboard Controllers/Ports