Chapter 5: Advanced Serverboard Setup
Universal Serial Bus (USB0/1)
Two USB 2.0 ports are located beside the GLAN (Ethernet) ports. USB0 is the bottom port and USB1 is the top port. See the table on the right for pin definitions.
Front Panel Universal
Serial Bus Headers
Two extra USB headers (at USB2/
3)can be used for front side USB access. You will need a USB cable to use these connections. Refer to the tables on the right for pin definitions.
Fan Headers
There are ten fan headers (FAN1- FAN10) on the
Note: Fan speed is controlled by the "Fan Speed Control Mode" set- ting in BIOS (see page
Serial Ports
There are two COM headers (COM1 and COM2) located be- tween the SCSI Channel A and the IDE headers. See the table on the right for pin definitions.
Universal Serial Bus Pin Definitions
| USB0 | USB1 | ||
Pin |
| Pin |
|
|
Number | Definition | Number | Definition | |
1 | +5V | 1 | +5V |
|
2 | P0- | 2 | P0- | |
3 | P0+ | 3 | P0+ | |
4 | Ground | 4 | Ground | |
5 | N/A | 5 | Key | |
Front Panel Universal Serial Bus
Pin Definitions
(USB2/3)
Pin |
|
Number | Definition |
1 | +5V |
2 | P0- |
3 | P0+ |
4 | Ground |
5 | N/A |
|
|
Fan Header
Pin Definitions
(FAN1-10)
Definition | Pin # | Color |
Fan PWR | 1 | Red |
Tachometer | 2 | Yellow |
GND | 3 | Black |
GND | 4 | Grey |
Tachometer | 5 | White |
Fan PWR | 6 | Orange |
Serial Port Pin Definitions
(COM1/COM2)
Pin Number Definition | Pin Number Definition | ||
1 | CD | 6 | DSR |
2 | RD | 7 | RTS |
3 | TD | 8 | CTS |
4 | DTR | 9 | RI |
5 | Ground |
|
|
