![](/images/new-backgrounds/1225240/22524099x1.webp)
SUPERSERVER
UID Button & UID LED
A Unit Identifier button/LED is lo- cated next to the VGA port on the rear of the chassis and a UID LED and button (separate) are located on the front control panel. The UID LED connection is located on pins 3 and 4 of JF1. Refer to the table on the right for pin definitions and to page
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be configured to function as a suspend button (see setting in BIOS). To turn off power in suspend mode, depress the button for at least 4 seconds.
UID & UID_LED
Pin Definitions (JF1)
Pin
Number Definition
3Front_UID
4UID_LED
Power Button
Pin Definitions
(JF1)
Pin
Number Definition
1PW_ON
2Ground
Chassis Intrusion
A Chassis Intrusion header is lo- cated at JL1. Attach the appropri- ate cable to inform you of a chas- sis intrusion.
GLAN1/2 (Ethernet Ports)
Two gigabit Ethernet ports are lo- cated beside the VGA port. These ports accept RJ45 type cables.
Chassis Intrusion Pin Definitions (JL1)
Pin
Number Definition
1Intrusion Input
2Ground