SUPERSERVER
5-2 Processor and Heatsink Installation
When handling the processor package, avoid placing direct pressure on the label area of the fan. Also, do not place the
!motherboard on a conductive surface, which can damage the BIOS battery and prevent the system from booting up.
IMPORTANT: Always connect the power cord last and always remove it before adding, removing or changing any hardware components. Make sure that you install the processor into the CPU socket before you install the CPU heat sink.
CPU Installation
1.Lift the lever on the CPU socket: Lift the lever completely as shown on the picture on the right; other- wise, you will damage the CPU socket when power is applied. In- stall CPU1 first.
Socket lever
2.Insert the CPU in the socket, making sure that pin 1 of the CPU aligns with pin 1 of the socket (both corners are marked with a triangle). When using only one CPU, install it into CPU socket #1. (Socket #2 is automatically disabled if only one CPU is used.)
Pin 1
3.Press the lever down until you hear a *click*, which means the CPU is securely installed in the CPU socket. Repeat these steps if you wish to install a second CPU in socket#2.
Socket lever in the locking Position
