SUPERSERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual

6.Press Enter.

7.Read the warning message as shown on the screen below.

8.Make sure that you have selected the correct disk drives to initialize. If correct, type Y to continue.

Rebuilding Arrays

Note 1: Rebuilding applies to Fault Tolerant arrays (RAID 1) only.

If an array build process (or initialization) is interrupted or critical with one member missing, you must perform a rebuild to optimized its function- ality. For a critical array rebuild operation, the optimal drive is the source drive.

Note 2: If no spare array exists and a hard disk drive fails, you need to create a spare before you can rebuild an array.

To Rebuild an array:

1.From the Main Menu, select Manage Arrays. From the list of arrays, select the array you want to rebuild.

2.Press Ctrl+R to rebuild.

B-14

Page 116
Image 116
SUPER MICRO Computer 6014P-82R, 6014P-8R user manual Rebuilding Arrays, To Rebuild an array