Vizio TWRS-I manual Initial Sensor System Test, Twrs-I

Page 10

Initial Sensor System Test

Before installing the sensor module, test the sensor system to verify operation. Once this test has been completed satisfactorily, the sensor module can be installed. If a problem occurs during the test procedure, refer to “Troubleshooting” on page 22.

1. Apply power to the controller. Check controller operation to confirm that it is working properly.

2. When power is applied to the receiver,

the “Min”

 

Water Conservation indicator will

 

illuminate. The TWRS-I receiver will display

alternating boxes and the TWRFS-I receiver will

display two flashing bars as shown in Figures 5 and 6.

3. Holding the sensor module next to the receiver, press

and hold the sensor test spindle down for at least 15

seconds to establish communication. See Figure 7.

The

Sensor Status indicator will illuminate,

the

Antenna icon will flash and the signal strength

Figure 5

Figure 7

Figure 6

Figure 8

bars will appear. The TWRFS-I receiver will display

the current air temperature. See Figure 8.

4. When the Antenna icon stops flashing, release the

test spindle. The receiver display will appear as

shown in Figures 9 or 10.

Figure 9 (TWRS-I)

Figure 10 (TWRFS-I)

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User’s Guide Contents English Getting Started Here’s all there is to itStep Water Conservation LEDs-Indicate the Water Installing the Receiver Module Connecting the Receiver Wires Wiring Procedure I sensor-readyNormally-open Sensor Initial Sensor System Test TWRS-ISensor Module Features Rain Sensor Site Selection Installing the Sensor Module Star Freeze Sensor model TWRFS-I Site Selection Select Centigrade or Fahrenheit Temperature Scale Set Temperature Activation Threshold TWRFS-I models onlySelect Temperature Threshold English Water Delay Feature Smart Bypass FeatureSmart Bypass button again Signal Strength Display Battery Strength DisplayDry Out Feature Fail Safe FeatureTo reset the receiver, press Loss of CommunicationSet or Restore the Sensor Address Code Turn the Receiver Module Off and OnSensor Module Battery Replacement Unscrew and remove the bottom cap from the sensor housingTroubleshooting Signal strength is weak or inconsistentReceiver display is blank Sensor module does not activate the receiver at close rangeSpecifications Toro Promise Five-year Limited Warranty Electromagnetic Compatibility IC 3575A-TWRS

TWRS-I specifications

The Vizio TWRS-I is a premium wireless speaker designed to elevate audio experiences with its impressive technology and features. As part of Vizio's commitment to high-quality sound, this speaker combines cutting-edge audio engineering with sleek design.

One of the standout features of the TWRS-I is its exceptional sound quality. Boasting advanced audio drivers and a specially designed enclosure, the speaker delivers clear highs, rich mid-range, and deep bass, providing an immersive listening experience. The TWRS-I is engineered to produce room-filling sound, making it suitable for both entertainment and music playback.

The speaker incorporates Dolby Atmos technology, enabling users to experience three-dimensional soundscapes. This immersive audio feature creates a more lifelike listening environment, allowing sound to come from all directions rather than just in front of the listener. This makes it an ideal choice for movie nights or gaming sessions, where ambient sound can enhance the overall experience.

Connectivity is another highlight of the Vizio TWRS-I. The speaker is equipped with Bluetooth, allowing for seamless wireless connections with smartphones, tablets, and other devices. This feature grants users the freedom to stream their favorite music directly from their devices without the need for cumbersome cables. For those who prefer a more traditional approach, the TWRS-I also includes an auxiliary input for wired connections.

Furthermore, this model supports multi-room audio, enabling users to connect multiple Vizio speakers for synchronized playback throughout the home. This function is perfect for hosting gatherings or simply enjoying music in different rooms without interruption.

The design of the Vizio TWRS-I is both modern and minimalistic, making it easy to fit into any décor. Its sleek profile and premium materials contribute to a sophisticated aesthetic that can complement any room design.

In conclusion, the Vizio TWRS-I is a feature-packed wireless speaker that stands out in the competitive audio market. With its high-quality sound, Dolby Atmos support, versatile connectivity options, and elegant design, this speaker offers an exceptional audio solution for both casual listeners and avid audiophiles alike. Whether used for movies, music, or games, the TWRS-I aims to redefine how we experience sound at home.
Top Page Image Contents