Vizio TWRS-I manual Installing the Receiver Module

Page 7

Installing the Receiver Module

Important: Installation of this product must comply with national and local building and electrical codes. For assistance, contact a professional irrigation system contractor in your area.

The receiver module is suitable for either indoor or outdoor installation. Select a location next to the controller that provides the following conditions:

•The display screen is clearly visible and the control buttons are easily accessed.

•The connection cable can reach the controller wiring terminal strip without straining.

•The antenna will be unobstructed and is able to be adjusted.

Figure 1

1. Install one of the provided stainless steel screws into the wall at the intended receiver location. Leave a 3mm gap behind the screw head.

Note: Use screw anchors if installing the receiver on drywall or masonry.

2.Hang the receiver on the screw ensuring the keyhole slot drops down onto the screw shaft.

3.Install a second screw through the lower tab to secure the receiver.

4.Route the connection cable through the bottom of the controller cabinet

to the wiring connection terminals. Important: If the receiver module is installed outdoors, be sure to keep the cover in the

closed position when you do not need to view the display or access the control buttons.

5

English

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User’s Guide Contents English Here’s all there is to it Getting StartedStep Water Conservation LEDs-Indicate the Water Installing the Receiver Module Wiring Procedure I sensor-ready Connecting the Receiver WiresNormally-open Sensor TWRS-I Initial Sensor System TestSensor Module Features Rain Sensor Site Selection Installing the Sensor Module Star Freeze Sensor model TWRFS-I Site Selection Select Centigrade or Fahrenheit Temperature Scale Set Temperature Activation Threshold TWRFS-I models onlySelect Temperature Threshold English Water Delay Feature Smart Bypass FeatureSmart Bypass button again Battery Strength Display Signal Strength DisplayFail Safe Feature Dry Out FeatureLoss of Communication To reset the receiver, pressTurn the Receiver Module Off and On Set or Restore the Sensor Address CodeUnscrew and remove the bottom cap from the sensor housing Sensor Module Battery ReplacementSignal strength is weak or inconsistent TroubleshootingSensor module does not activate the receiver at close range Receiver display is blankSpecifications Toro Promise Five-year Limited Warranty IC 3575A-TWRS Electromagnetic Compatibility

TWRS-I specifications

The Vizio TWRS-I is a premium wireless speaker designed to elevate audio experiences with its impressive technology and features. As part of Vizio's commitment to high-quality sound, this speaker combines cutting-edge audio engineering with sleek design.

One of the standout features of the TWRS-I is its exceptional sound quality. Boasting advanced audio drivers and a specially designed enclosure, the speaker delivers clear highs, rich mid-range, and deep bass, providing an immersive listening experience. The TWRS-I is engineered to produce room-filling sound, making it suitable for both entertainment and music playback.

The speaker incorporates Dolby Atmos technology, enabling users to experience three-dimensional soundscapes. This immersive audio feature creates a more lifelike listening environment, allowing sound to come from all directions rather than just in front of the listener. This makes it an ideal choice for movie nights or gaming sessions, where ambient sound can enhance the overall experience.

Connectivity is another highlight of the Vizio TWRS-I. The speaker is equipped with Bluetooth, allowing for seamless wireless connections with smartphones, tablets, and other devices. This feature grants users the freedom to stream their favorite music directly from their devices without the need for cumbersome cables. For those who prefer a more traditional approach, the TWRS-I also includes an auxiliary input for wired connections.

Furthermore, this model supports multi-room audio, enabling users to connect multiple Vizio speakers for synchronized playback throughout the home. This function is perfect for hosting gatherings or simply enjoying music in different rooms without interruption.

The design of the Vizio TWRS-I is both modern and minimalistic, making it easy to fit into any décor. Its sleek profile and premium materials contribute to a sophisticated aesthetic that can complement any room design.

In conclusion, the Vizio TWRS-I is a feature-packed wireless speaker that stands out in the competitive audio market. With its high-quality sound, Dolby Atmos support, versatile connectivity options, and elegant design, this speaker offers an exceptional audio solution for both casual listeners and avid audiophiles alike. Whether used for movies, music, or games, the TWRS-I aims to redefine how we experience sound at home.
Top Page Image Contents