Vizio TWRS-I manual Troubleshooting, Signal strength is weak or inconsistent

Page 24

Troubleshooting

If you encounter problems at any point in the installation process, or the components do not function properly, try the Troubleshooting procedures first. If the problem is not listed or the remedy does not resolve the problem, contact your local Toro irrigation distributor for assistance.

❑Signal strength is weak or inconsistent.

The Wireless Rain Sensor system has a maximum operating range of 152.4m (500') LOS (Line-of-Site). Operating range is based on optimum site conditions with no signal interference present. But in most cases there are buildings in the way or other sources of radio signal interference, that can reduce the signal range. Most residential and small commercial buildings will not pose reception problems under normal conditions. However, there are some sites with buildings or structures constructed of thick, dense walls, or contain electrical equipment that emits high levels of radio frequency interference. If you are having difficulty obtaining good signal strength, try the following possible solutions:

•Move the antenna away from any large metal object.

•Avoid indoor receiver locations where cellular or cordless phones have trouble with reception.

•Mount the sensor and receiver modules closer together if possible.

•If the sensor is installed directly over the receiver, move the sensor slightly to either side of the receiver.

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents User’s Guide Contents English Getting Started Here’s all there is to itStep Water Conservation LEDs-Indicate the Water Installing the Receiver Module Connecting the Receiver Wires Wiring Procedure I sensor-readyNormally-open Sensor Initial Sensor System Test TWRS-ISensor Module Features Rain Sensor Site Selection Installing the Sensor Module Star Freeze Sensor model TWRFS-I Site Selection Set Temperature Activation Threshold TWRFS-I models only Select Centigrade or Fahrenheit Temperature ScaleSelect Temperature Threshold English Smart Bypass Feature Water Delay FeatureSmart Bypass button again Signal Strength Display Battery Strength DisplayDry Out Feature Fail Safe FeatureTo reset the receiver, press Loss of CommunicationSet or Restore the Sensor Address Code Turn the Receiver Module Off and OnSensor Module Battery Replacement Unscrew and remove the bottom cap from the sensor housingTroubleshooting Signal strength is weak or inconsistentReceiver display is blank Sensor module does not activate the receiver at close rangeSpecifications Toro Promise Five-year Limited Warranty Electromagnetic Compatibility IC 3575A-TWRS

TWRS-I specifications

The Vizio TWRS-I is a premium wireless speaker designed to elevate audio experiences with its impressive technology and features. As part of Vizio's commitment to high-quality sound, this speaker combines cutting-edge audio engineering with sleek design.

One of the standout features of the TWRS-I is its exceptional sound quality. Boasting advanced audio drivers and a specially designed enclosure, the speaker delivers clear highs, rich mid-range, and deep bass, providing an immersive listening experience. The TWRS-I is engineered to produce room-filling sound, making it suitable for both entertainment and music playback.

The speaker incorporates Dolby Atmos technology, enabling users to experience three-dimensional soundscapes. This immersive audio feature creates a more lifelike listening environment, allowing sound to come from all directions rather than just in front of the listener. This makes it an ideal choice for movie nights or gaming sessions, where ambient sound can enhance the overall experience.

Connectivity is another highlight of the Vizio TWRS-I. The speaker is equipped with Bluetooth, allowing for seamless wireless connections with smartphones, tablets, and other devices. This feature grants users the freedom to stream their favorite music directly from their devices without the need for cumbersome cables. For those who prefer a more traditional approach, the TWRS-I also includes an auxiliary input for wired connections.

Furthermore, this model supports multi-room audio, enabling users to connect multiple Vizio speakers for synchronized playback throughout the home. This function is perfect for hosting gatherings or simply enjoying music in different rooms without interruption.

The design of the Vizio TWRS-I is both modern and minimalistic, making it easy to fit into any décor. Its sleek profile and premium materials contribute to a sophisticated aesthetic that can complement any room design.

In conclusion, the Vizio TWRS-I is a feature-packed wireless speaker that stands out in the competitive audio market. With its high-quality sound, Dolby Atmos support, versatile connectivity options, and elegant design, this speaker offers an exceptional audio solution for both casual listeners and avid audiophiles alike. Whether used for movies, music, or games, the TWRS-I aims to redefine how we experience sound at home.
Top Page Image Contents