Vizio TWRS-I manual Turn the Receiver Module Off and On, Set or Restore the Sensor Address Code

Page 22

Turn the Receiver Module Off and On

1.To turn the receiver module Off, press and hold the Adjust button until two dashes are displayed (approximately 5 seconds), then release.

2.To turn the receiver On, press the Setup button two times. The receiver will return to the normal display mode within approximately 10 seconds.

Set or Restore the Sensor Address Code

The receiver and sensor modules are factory-matched to communicate using a specific address code. If you have purchased a new sensor module or if it becomes necessary to reset the address code, use the following procedure to enable communication:

1. Press and hold the

Smart Bypass button until all three

 

Water Conservation indicators are illuminated and the

Setup

icon begins blinking (approximately 15 seconds). See Figure 28.

2.Activate the sensor module at close range by pressing the test spindle until the Sensor Status indicator is illuminated, then release the test spindle. Refer to step 3 of “Initial System Test” on page 8 for additional information.

Figure 28

Note: If the Water Conservation level is set to Medium or Maximum, or the Dry Out feature is in

use, the sensor system will be activated. Press the Smart Bypass button to reset the receiver to the Monitor mode.

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User’s Guide Contents English Getting Started Here’s all there is to itStep Water Conservation LEDs-Indicate the Water Installing the Receiver Module Connecting the Receiver Wires Wiring Procedure I sensor-readyNormally-open Sensor Initial Sensor System Test TWRS-ISensor Module Features Rain Sensor Site Selection Installing the Sensor Module Star Freeze Sensor model TWRFS-I Site Selection Select Centigrade or Fahrenheit Temperature Scale Set Temperature Activation Threshold TWRFS-I models onlySelect Temperature Threshold English Water Delay Feature Smart Bypass FeatureSmart Bypass button again Signal Strength Display Battery Strength DisplayDry Out Feature Fail Safe FeatureTo reset the receiver, press Loss of CommunicationSet or Restore the Sensor Address Code Turn the Receiver Module Off and OnSensor Module Battery Replacement Unscrew and remove the bottom cap from the sensor housingTroubleshooting Signal strength is weak or inconsistentReceiver display is blank Sensor module does not activate the receiver at close rangeSpecifications Toro Promise Five-year Limited Warranty Electromagnetic Compatibility IC 3575A-TWRS

TWRS-I specifications

The Vizio TWRS-I is a premium wireless speaker designed to elevate audio experiences with its impressive technology and features. As part of Vizio's commitment to high-quality sound, this speaker combines cutting-edge audio engineering with sleek design.

One of the standout features of the TWRS-I is its exceptional sound quality. Boasting advanced audio drivers and a specially designed enclosure, the speaker delivers clear highs, rich mid-range, and deep bass, providing an immersive listening experience. The TWRS-I is engineered to produce room-filling sound, making it suitable for both entertainment and music playback.

The speaker incorporates Dolby Atmos technology, enabling users to experience three-dimensional soundscapes. This immersive audio feature creates a more lifelike listening environment, allowing sound to come from all directions rather than just in front of the listener. This makes it an ideal choice for movie nights or gaming sessions, where ambient sound can enhance the overall experience.

Connectivity is another highlight of the Vizio TWRS-I. The speaker is equipped with Bluetooth, allowing for seamless wireless connections with smartphones, tablets, and other devices. This feature grants users the freedom to stream their favorite music directly from their devices without the need for cumbersome cables. For those who prefer a more traditional approach, the TWRS-I also includes an auxiliary input for wired connections.

Furthermore, this model supports multi-room audio, enabling users to connect multiple Vizio speakers for synchronized playback throughout the home. This function is perfect for hosting gatherings or simply enjoying music in different rooms without interruption.

The design of the Vizio TWRS-I is both modern and minimalistic, making it easy to fit into any décor. Its sleek profile and premium materials contribute to a sophisticated aesthetic that can complement any room design.

In conclusion, the Vizio TWRS-I is a feature-packed wireless speaker that stands out in the competitive audio market. With its high-quality sound, Dolby Atmos support, versatile connectivity options, and elegant design, this speaker offers an exceptional audio solution for both casual listeners and avid audiophiles alike. Whether used for movies, music, or games, the TWRS-I aims to redefine how we experience sound at home.
Top Page Image Contents