Vizio TWRS-I manual Set Temperature Activation Threshold TWRFS-I models only

Page 16

Set Temperature Activation Threshold (TWRFS-I models only)

The freeze sensor temperature activation threshold is adjustable from 2°C to 7°C ( 35°F to 45°F). When the air temperature reaches the threshold setting, the freeze sensor activates the receiver, and the Freeze Status indicator will turn on. The sensor system will return to the Monitor mode when the outside air temperature rises above the sensor threshold temperature.

Select Centigrade or Fahrenheit Temperature Scale

1.Press the Setup button to display the current temperature scale (°C or °F) and the Setup icon will begin flashing to indicate the selected feature can be adjusted. See Figure 16.

2.To select the alternate temperature scale, press the Advance button.

Figure 16

Select Temperature Threshold

Figure 17

1.

Press the

 

Setup button to display Temperature icon. The display

 

will indicate the current temperature threshold setting and the

Setup

 

icon will begin flashing to indicate the selected feature can be adjusted.

 

See Figure 17.

 

2.

Press the

Advance button to set the sensor threshold temperature.

Congratulations! Your Wireless Rain Sensor system installation is complete. To take advantage of the unique Water Conservation feature, review the information on the next page to select the conservation level that best suits your landscape irrigation needs.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User’s Guide Contents English Getting Started Here’s all there is to itStep Water Conservation LEDs-Indicate the Water Installing the Receiver Module Connecting the Receiver Wires Wiring Procedure I sensor-readyNormally-open Sensor Initial Sensor System Test TWRS-ISensor Module Features Rain Sensor Site Selection Installing the Sensor Module Star Freeze Sensor model TWRFS-I Site Selection Select Centigrade or Fahrenheit Temperature Scale Set Temperature Activation Threshold TWRFS-I models onlySelect Temperature Threshold English Water Delay Feature Smart Bypass FeatureSmart Bypass button again Signal Strength Display Battery Strength DisplayDry Out Feature Fail Safe FeatureTo reset the receiver, press Loss of CommunicationSet or Restore the Sensor Address Code Turn the Receiver Module Off and OnSensor Module Battery Replacement Unscrew and remove the bottom cap from the sensor housingTroubleshooting Signal strength is weak or inconsistentReceiver display is blank Sensor module does not activate the receiver at close rangeSpecifications Toro Promise Five-year Limited Warranty Electromagnetic Compatibility IC 3575A-TWRS

TWRS-I specifications

The Vizio TWRS-I is a premium wireless speaker designed to elevate audio experiences with its impressive technology and features. As part of Vizio's commitment to high-quality sound, this speaker combines cutting-edge audio engineering with sleek design.

One of the standout features of the TWRS-I is its exceptional sound quality. Boasting advanced audio drivers and a specially designed enclosure, the speaker delivers clear highs, rich mid-range, and deep bass, providing an immersive listening experience. The TWRS-I is engineered to produce room-filling sound, making it suitable for both entertainment and music playback.

The speaker incorporates Dolby Atmos technology, enabling users to experience three-dimensional soundscapes. This immersive audio feature creates a more lifelike listening environment, allowing sound to come from all directions rather than just in front of the listener. This makes it an ideal choice for movie nights or gaming sessions, where ambient sound can enhance the overall experience.

Connectivity is another highlight of the Vizio TWRS-I. The speaker is equipped with Bluetooth, allowing for seamless wireless connections with smartphones, tablets, and other devices. This feature grants users the freedom to stream their favorite music directly from their devices without the need for cumbersome cables. For those who prefer a more traditional approach, the TWRS-I also includes an auxiliary input for wired connections.

Furthermore, this model supports multi-room audio, enabling users to connect multiple Vizio speakers for synchronized playback throughout the home. This function is perfect for hosting gatherings or simply enjoying music in different rooms without interruption.

The design of the Vizio TWRS-I is both modern and minimalistic, making it easy to fit into any décor. Its sleek profile and premium materials contribute to a sophisticated aesthetic that can complement any room design.

In conclusion, the Vizio TWRS-I is a feature-packed wireless speaker that stands out in the competitive audio market. With its high-quality sound, Dolby Atmos support, versatile connectivity options, and elegant design, this speaker offers an exceptional audio solution for both casual listeners and avid audiophiles alike. Whether used for movies, music, or games, the TWRS-I aims to redefine how we experience sound at home.
Top Page Image Contents