Vizio TWRS-I manual Smart Bypass Feature, Smart Bypass button again, Water Delay Feature

Page 18

Smart Bypass Feature

Figure 20

Once the rain sensor becomes active, it can be easily bypassed by pressing

the

Smart Bypass button. When the rain sensor is bypassed,

the

Sensor Status indicator and

Smart Bypass icon will begin

flashing. See Figure 20.

 

The controller will resume automatic watering operations as scheduled. The rain sensor will stay in the Bypass mode until it automatically resets to the Monitor mode, or is returned to the active

mode by pressing the

Smart Bypass button again.

Water Delay Feature

The Water Delay feature provides a convenient method of postponing automatic irrigation from 1 to 5 days when rain (or freeze) conditions are expected.

1.

Press the

Setup button to display the

Water Delay icon.

Figure 21

 

The

Setup icon will begin flashing to indicate the selected feature can

 

 

be adjusted. See Figure 21.

 

 

2.

Press the

Adjust button to select 1.0 to 5.0 days.

 

•To activate the Water Delay period, press the Smart Bypass button.

The number of days remaining in the Water Delay period will countdown as days pass. Automatic watering will resume as scheduled when 0.0 Water Delay days remain.

•To cancel the Water Delay mode and resume automatic watering operations as scheduled,

press the Smart Bypass button again.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents User’s Guide Contents English Getting Started Here’s all there is to itStep Water Conservation LEDs-Indicate the Water Installing the Receiver Module Connecting the Receiver Wires Wiring Procedure I sensor-readyNormally-open Sensor Initial Sensor System Test TWRS-ISensor Module Features Rain Sensor Site Selection Installing the Sensor Module Star Freeze Sensor model TWRFS-I Site Selection Set Temperature Activation Threshold TWRFS-I models only Select Centigrade or Fahrenheit Temperature ScaleSelect Temperature Threshold English Smart Bypass Feature Water Delay FeatureSmart Bypass button again Signal Strength Display Battery Strength DisplayDry Out Feature Fail Safe FeatureTo reset the receiver, press Loss of CommunicationSet or Restore the Sensor Address Code Turn the Receiver Module Off and OnSensor Module Battery Replacement Unscrew and remove the bottom cap from the sensor housingTroubleshooting Signal strength is weak or inconsistentReceiver display is blank Sensor module does not activate the receiver at close rangeSpecifications Toro Promise Five-year Limited Warranty Electromagnetic Compatibility IC 3575A-TWRS

TWRS-I specifications

The Vizio TWRS-I is a premium wireless speaker designed to elevate audio experiences with its impressive technology and features. As part of Vizio's commitment to high-quality sound, this speaker combines cutting-edge audio engineering with sleek design.

One of the standout features of the TWRS-I is its exceptional sound quality. Boasting advanced audio drivers and a specially designed enclosure, the speaker delivers clear highs, rich mid-range, and deep bass, providing an immersive listening experience. The TWRS-I is engineered to produce room-filling sound, making it suitable for both entertainment and music playback.

The speaker incorporates Dolby Atmos technology, enabling users to experience three-dimensional soundscapes. This immersive audio feature creates a more lifelike listening environment, allowing sound to come from all directions rather than just in front of the listener. This makes it an ideal choice for movie nights or gaming sessions, where ambient sound can enhance the overall experience.

Connectivity is another highlight of the Vizio TWRS-I. The speaker is equipped with Bluetooth, allowing for seamless wireless connections with smartphones, tablets, and other devices. This feature grants users the freedom to stream their favorite music directly from their devices without the need for cumbersome cables. For those who prefer a more traditional approach, the TWRS-I also includes an auxiliary input for wired connections.

Furthermore, this model supports multi-room audio, enabling users to connect multiple Vizio speakers for synchronized playback throughout the home. This function is perfect for hosting gatherings or simply enjoying music in different rooms without interruption.

The design of the Vizio TWRS-I is both modern and minimalistic, making it easy to fit into any décor. Its sleek profile and premium materials contribute to a sophisticated aesthetic that can complement any room design.

In conclusion, the Vizio TWRS-I is a feature-packed wireless speaker that stands out in the competitive audio market. With its high-quality sound, Dolby Atmos support, versatile connectivity options, and elegant design, this speaker offers an exceptional audio solution for both casual listeners and avid audiophiles alike. Whether used for movies, music, or games, the TWRS-I aims to redefine how we experience sound at home.
Top Page Image Contents