Woods Equipment BB6000X, MAN0680, BB7200X, BB8400X manual 33347E

Page 11

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

3 - PN1006681

WARNING

CRUSHING AND PINCHING HAZARD

Be extremely careful handling various parts of the machine. They are heavy and hands, fingers, feet, and other body parts could be crushed or pinched between tractor and implement.

Operate tractor controls from tractor seat only.

Do not stand between tractor and implement when tractor is in gear.

Make sure parking brake is engaged before going between tractor and implement.

Stand clear of machine while in operation or when it is being raised or lowered.

WARNING

TO AVOID SERIOUS INJURY OR DEATH:

Read Operator's Manual (available from dealer) and follow all safety precautions.

Keep all shields in place and in good condition.

11 - PN18864

DANGER

ROTATING DRIVELINE

CONTACT CAN CAUSE DEATH

KEEP AWAY!

DO NOT OPERATE WITHOUT -

All driveline guards, tractor and equipment shields in place

Drivelines securely attached at both ends

Driveline guards that turn freely on

 

driveline

18864-C

 

Operate mower from tractor seat only.

Lower mower, stop engine and remove key before dismounting tractor.

Allow no children or untrained persons to operate equipment.

Do not transport towed or semi-mounted units over 20 mph.

WARNING

FALLING OFF CAN RESULT IN BEING RUN OVER.

Tractor must be equipped with ROPS (or ROPS CAB) and seat belt. Keep foldable ROPS systems in "locked up" position at all times.

Buckle Up! Keep seat belt securely fastened.

Allow no riders.

RAISED EQUIPMENT CAN DROP AND CRUSH.

Before working underneath, follow all instructions and safety rules in operator's manual and securely block up all corners of equipment with jack stands.

Securely blocking prevents equipment from dropping from hydraulic leakdown, hydraulic system failures or mechanical component failures.

WARNING

DO NOT EXCEED PTO SPEED OF

540 RPM

PTO speeds higher than 540 RPM can cause

 

equipment failure and personal injury.

1006681

14 - PN 1004114

DANGER

If shaft connection is visible, shield is missing. Replace shield before

operating equipment.

1004114

5 - PN 15502

WARNING

ROTATING COMPONENTS

Do not operate without cover in place.

Look and listen for rotation. Do not open cover until all components have stopped.

CONTACT WITH ROTATING PARTS CAN CAUSE SERIOUS INJURY.

15502--B

10 - PN 33347

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿33347E

MAN0680 (11/30/2007)

Safety 11

 

 

 

Image 11
Contents Brushbulltm To the Dealer IntroductionLEA EL Instructivo Table of ContentsGeneral Information SpecificationsSafety Free Mower Safety VideoTraining Package for Rotary Mowers/Cutters-English/Spanish Training Package for Rotary Mowers/Cutters-EnglishPreparation Safety RulesTraining Transportation MaintenanceOperation Storage Be Careful Safety & Instructional Decals33347E Tractor Stability Connecting Cutter to TractorOperation OperationQuick Hitch SET-UP Driveline AdjustmentShortening Driveline Driveline Interference Check Cutting Height AdjustmentCheck Chain Adjustment Driveline Installation Tractor PTOPRE-OPERATION Check List Operating TechniqueShredding Material Lubrication Information Owner ServiceOwner Service Blocking MethodDriveline Lubrication Slip Clutch AdjustmentGearbox Lubrication Blade Removal Blade ServiceBlade Installation Shielding Repair Cleaning CutterMowing Conditions TroubleshootingTroubleshooting Seal Replacement Dealer ServiceDealer Service Gearbox MaintenanceHorizontal Shaft Leak Repair Vertical Shaft RepairDisassemble Gearbox Gearbox AssemblyGearbox Repair Remove Gearbox from CutterCrossbar Removal Reinstall GearboxUniversal Joint Repair Crossbar InstallationJoint Disassembly Install Bearing Cups Joint AssemblyDealer Service Dealer SET-UP Instructions AssemblyAssembly Connect A-Frame Arms Install TailwheelDisassemble Shipping Unit Assemble CutterInstall Rubber Deflector Install Slip Clutch DrivelineInstall Safety Shielding Install Optional Chain ShieldingModel Baffle KIT Installation OptionalCheck Chain Installation Optional Dual Tailwheel Installation BB7200X, BB8400X OptionalDelivery Check Dealer Check ListDealer Check Lists PRE-DELIVERY Check ListParts Parts Index BrushbulltmBB6000X, BB7200X & BB8400X Assembly BB6000X, BB7200X & BB8400X Parts List Gearbox Assembly Gearbox Assembly Parts List Slip Clutch Drive Assembly BB7200X & BB8400X Dual Tailwheel Optional Front & Rear Chain Shielding Optional Check Chain Assembly Optional Crossbar Puller Optional Appendix Bolt Torque ChartSAE Series Torque Chart Metric Series Torque ChartAbbreviations Bolt Size ChartIndex IndexWarranty Rev /23/2005 MAN0680