Woods Equipment MAN0680, BB6000X manual Dual Tailwheel Installation BB7200X, BB8400X Optional

DUAL TAILWHEEL INSTALLATION BB7200X, BB8400X (OPTIONAL)

1.Attach dual tailwheel (1) to main frame (D) using position A and desired height location as shown in Figure 35.

2.Secure with cap screws (17) and hex nuts (18).

3.Torque hardware to 175 lbs-ft.

1. Dual tailwheel

17.5/8 NC x 2-1/2 HHCS

18.5/8 Flange lock nut

A. Tailwheel pivot hole

D.Deck, BB7200X & BB8400X

Figure 35. Dual Tailwheel Installation

CHECK CHAIN INSTALLATION (OPTIONAL)

Check chains are used to carry the front of cutter at a set height. See Figure 36.

1.Thread check chains (3) through check chain bracket (2).

2.Attach lower end of check chain (3) to mast plate

(9) with bolt (6), washer (7), and nut (8).

3.Attach keyhole brackets (2) to each side of tractor top link bracket (10) with bolt (4) and nut (5).

2.Check chain bracket

3.3/8 Chain, 32-link

4.3/4 NC x 6 HHCS GR5

5.3/4 NC Lock nut

6.5/8 NC x 2-1/4 HHCS GR5

7.5/8 Flat washer

8.5/8 NC Hex nut

9.Mast Plate

10.Tractor top link bracket

Figure 36. Optional Check Chain Assembly

(Rev. 4/24/2009) MAN0680 (11/30/2007)

Assembly 33