UNIVERSAL JOINT REPAIR
1. | Yoke |
|
2. | Cup and bearings |
|
3. | Snap ring | 3 |
4. | Journal cross | 1 |
3 | 2 | |
2 | ||
| ||
| 4 | |
| 2 | |
| 3 | |
| 2 | |
| 3 | |
1 | CD1645A | |
| ||
| ||
Figure 17. | ||
U-Joint Disassembly
1.Remove external snap rings from yokes in four locations as shown in Figure 18.
CD1385A
Figure 18
2.With snap rings removed, support drive in vise, hold yoke in hand and tap on yoke to drive cup up out of yoke. See Figure 19.
3.Clamp cup in vise as shown in Figure 20 and tap on yoke to completely remove cup from yoke. Repeat Step 2 & Step 3 for opposite cup.
4.Place universal cross in vise as shown in Figure 21 and tap on yoke to remove cup. Repeat Step 3 for final removal. Drive remaining cup out with a drift and hammer.
CD1386
Figure 19
CD1387
Figure 20
CD1388
Figure 21
MAN0260 (8/6/2004) | Dealer Service 25 |
|
|