Install Front Roller (Optional)
1.Insert four carriage bolts (8) through the front mower frame from inside out.
2.Place roller bracket (2) over bolts; then install flange lock nuts (9) on bolts and tighten.
3.Place front roller (1), sleeve (3), bearings (4), and washers (5) in roller bracket as shown in Figure 29.
4.Insert cap screw (3) through bracket and roller.
5.Secure with flanged lock nut (2). Do not overtighten, roller must spin freely.
| 8 |
| 9 |
|
|
| |
|
|
| 7 |
| 2 |
| 5 |
|
|
| |
|
|
| 4 |
| 6 |
| 1 |
|
|
| |
|
| 3 | CD6310 |
| 5 | 4 |
|
1. | Roller |
|
|
2. | Roller bracket |
|
|
3. | Spacer |
|
|
4. | Bearing |
|
|
5. | 1/2 Flat washer SAE |
| |
6. | 1/2 NC x 9 HHCS GR5 |
| |
7. | 1/2 NC Flanged locknut |
| |
8. | 3/8 NC x |
| |
9. | 3/8 NC Flanged locknut |
| |
Figure 29. Front Roller Installation
NOTES
30 Assembly | MAN0260 (8/6/2004) |
|
|