OWNER SERVICE
The information in this section is written for operators who possess basic mechanical skills. Should you need help, your dealer has trained service technicians avail- able. For your protection, read and follow all safety information in this manual.
A WARNING
■Before working underneath, block mower securely. Hydraulic system leak down and failure of mechanical or hydraulic system can cause equip- ment to drop.
■Keep all persons away from operator control area while performing adjustments, service or maintenance.
A CAUTION
■Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy,
LUBRICATION
Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The accompanying illustrations show lubrication points. Lubrication intervals are based on normal operating conditions. Severe or unusual conditions may require more frequent lubrication.
Use a lithium grease of #2 consistency with a MOLY (molybdenum disulfide) additive for all locations. Be sure to clean fittings thoroughly before attaching grease gun. When applied according to the lubrication chart, one good pump of most guns is sufficient.
Spindle Lubrication
There are grease zerks on each of the three blade spindles. They are accessible without shield removal. Grease each spindle every 24 hours of operation with a good grade
NOTICE
■Do not
Figure 3. Spindle Lubrication
Caster Lubrication
Lubricate the caster pivot and caster wheel every eight hours of operation.
Figure 4. Caster Lubrication
BLADE SERVICING
Inspect blades before each use to determine that they are securely fastened and in good condition. Replace any blade that is bent, excessively nicked, worn, or has any other damage. Small nicks can be ground out when sharpening.
12 Owner Service | 15148 (Rev. 2/9/2007) |
|
|