Woods Equipment L59A-3, L306A-3 manual L306 A-3 Caster Assembly Optional

L306 A-3 CASTER ASSEMBLY (OPTIONAL)

REF	PART		QTY	DESCRIPTION
A	24095		-	L306 Caster assembly bundle
1	13400		1	Caster assembly
2	15638		1	Wheel, 10" C-flange w/sleeve
3	23857		1	Caster wheel yoke assembly
4	13435		1	Caster arm assembly
5	13444		1	Left caster adjustment bracket
6	13444		1	Right caster adjustment bracket
7	12296	*	1	1/4-28 Straight grease fitting,
				15/32" long
8	21020		1	1/4 x 1-1/4 Spirol pin -or-
8	1285	*	1	1/4 x 1-1/2 Cotter pin
9	-----	*	1	Straight 1/4 self-tap grease fitting
				(for steel wheel) -or-
9	195	*	1	Straight 1/8 pipe thread grease fit-
				ting (for plyethylene wheel)
10	976	*	1	3/8 NC x 1-1/2 HHCS GR5
11	838	*	2	3/8 Standard lock washer
12	835	*	2	3/8 NC Hex nut, plated
13	11900	*	3	1/2 NC Flanged hex lock nut

REF	PART		QTY	DESCRIPTION
14	24576		2	1/2 NC x 1-3/4 HHCS GR5
15	23479		1	1/2 NC x 5 HHCS GR5
16	29368	(c)	1	1/2 x 3/4 OD x 3-3/4 HT Sleeve
				-or-
16	12242	(c)	1	17 GA Wall x 5/8 OD x 3-3/8 tube
17	29375	(b)	2	3/4 Bore flanged bearing for 1-1/8
				hole -or-
17	4228	(b)	2	5/8 Bore flanged bearing for 1-3/8
				hole -or-
17	2905	(b)	2	5/8 Bore flanged bearing for 1-1/8
				hole -or-
17	65578	(b)	2	3/4 Bore x 1.385 flanged wheel
				bearing with groove -or-
17	65577	(b)	2	3/4 Bore x 1.385 flanged wheel
				bearing with notch

*Standard hardware, obtain locally

(b)Measure old bearing.

(c)Measure outside diameter of old sleeve.

42 Parts 15148 (Rev. 2/9/2007)