Woods Equipment manual Specifications, General Information, L59A-3 L306A-3

SPECIFICATIONS

MODEL	L59A-3	L306A-3
Cutting Width	60"	72"
Cutting Height Range	1-1/2" - 4-1/4"	1-1/2" - 4-1/4"
Blade Speed (RPM)	2,786	2,173
Blade Tip Speed (feet per minute)	14,770	13,938
Blade Spindles	3	3
Number of Blades	3	3
Caster Wheels	Optional	Optional
Caster Size	3" x 8-1/2"	3-1/4" x 10-1/2"
Mower Frame Thickness	7 GA	7 GA

GENERAL INFORMATION

The purpose of this manual is to assist you in operating and maintaining your mower. Read it carefully. It fur- nishes information and instructions that will help you achieve years of dependable performance. These instructions have been compiled from extensive field experience and engineering data. Some information may be general in nature, due to unknown and varying operating conditions. However, through experience and these instructions, you should be able to develop procedures suitable to your particular situation.

￿￿￿￿￿￿￿

■Some illustrations in this manual show the mower with safety shields removed to provide a better view. The mower should never be operated with any safety shielding removed.

The illustrations and data used in this manual were cur- rent at the time of printing. However, due to possible inline production changes, your machine may vary slightly in detail. We reserve the right to redesign and change the machines as may be necessary without notification.

Throughout this manual, references are made to right and left directions. These are determined by standing behind the tractor facing the direction of forward travel. Blade rotation is counter-clockwise as viewed from the top of the mower.

4 Introduction 15148 (Rev. 2/9/2007)