Owner Service, Service Engine | Woods Equipment FZ28K, FZ23B

OWNER SERVICE

Before performing any service or maintenance, lower attachment to ground, turn off power unit engine, remove key, and disconnect battery ground cable (negative -).

Before working underneath, read manual instructions, securely block up, and check stabil- ity. Secure blocking prevents equipment from dropping due to hydraulic leak down, hydraulic system failure, or mechanical component failure.

Keep all persons away from operator control area while performing adjustments, service, or maintenance.

CAUTION

Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

SERVICE ENGINE

NOTE: Follow engine manufacturer recommendations in engine manual.

Check Engine Oil Level

NOTE: Never attempt to check oil level while engine is running. Serious injury or damage to equipment could result.

1.Park power unit on a level surface.

2.Stop engine and clean off dirt and dust from around dipstick.

3.Remove dipstick, check oil level. Oil level should be between marks on dipstick.

4.Add oil as necessary. See engine owner’s manual for specifications.

Change Engine Oil

NOTICE

■Use care to prevent hot oil from contacting bare skin.

1.Run engine to allow oil to become hot. This will ensure that most foreign materials are in suspension and will be flushed out with the oil.

2.Remove drain plug and drain crankcase.

3.Remove oil filter.

4.Install new oil filter.

5.Install drain plug and add oil.

NOTE: Refer to the engine manual for oil specifica- tions, capacity, service rating, and proper grade.

LUBRICATION INFORMATION

1.Do not let excess grease collect on or around parts, particularly when operating in sandy areas.

2.See Figure 5 for lubrication points and frequency or lubrication based on normal operating conditions. Severe or unusual conditions may require more frequent lubrication.

3.Use a lithium grease of #2 consistency with a MOLY (molybdenum disulfide) additive for all locations unless otherwise noted. Be sure to clean fittings thoroughly before attaching grease gun. One good pump of most guns is sufficient when the lubrication schedule is followed.

Lubrication (Service Intervals)

Ref	Description	Frequency
1.	Hydrostatic Fluid Level (check)	8 hours
2.	Deck Pivot	8 hours
3.	Driveline	80 hours
4.	Driveshaft	8 hours
5.	Blade Spindles	40 hours
6.	Front Wheels	8 hours
7.	Engine Oil Level (check)	8 hours
8.	Parking Brake	80 hours
9.	Gearbox (under deck)	500 hours
10.	Front Lift Linkage	40 hours
11.	Caster Pivot	40 hours

16 Owner Service	MAN0875 (2/8/2011)

FZ23B, FZ28K specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural and landscape maintenance equipment. Among its notable innovations are the FZ28K and FZ23B models, designed for immense versatility and efficiency in various applications.

The Woods FZ28K is known for its robust construction and powerful performance. This model features a 28-inch cutting deck, making it ideal for large-scale mowing tasks. The FZ28K is equipped with a high-performance engine designed for durability and reliability, allowing operators to tackle tough terrain with ease. Its advanced cutting technology ensures a clean and even cut, promoting healthier grass growth. Enhanced maneuverability is achieved through its compact design, allowing users to navigate tight spaces effortlessly.

On the other hand, the FZ23B model is built for versatility and ease of use in a multitude of applications. With a 23-inch cutting deck, it is perfect for both residential and commercial properties. The FZ23B prioritizes user comfort, featuring an ergonomic design and intuitive controls that reduce operator fatigue during extended use. Its lightweight structure does not compromise strength, making it nimble enough for intricate mowing tasks while remaining sturdy for larger areas.

Both models utilize cutting-edge technology that optimizes power and efficiency. Featuring adjustable cutting heights, operators can customize their mowing experience, ensuring the best results for their specific lawn conditions. The advanced engine technology in both the FZ28K and FZ23B models ensures reduced emissions, contributing to environmentally friendly operation while still delivering excellent performance.

Another key characteristic of Woods Equipment’s offerings is their ease of maintenance. Both models come with accessible service points, allowing users to perform routine maintenance with minimal effort. This focus on user experience extends to the design of the mower decks, which are constructed for easy cleaning and upkeep.

In conclusion, the Woods Equipment FZ28K and FZ23B mowers represent the perfect blend of power, efficiency, and user-centric design. Their advanced features and technologies empower operators to achieve professional-grade results while ensuring comfort and ease of use. Whether mowing large pastures or manicuring residential lawns, the Woods FZ series stands ready to meet diverse landscaping needs, solidifying Woods Equipment’s reputation for excellence in outdoor power tools.